Advantages Of Oak Wood

Oak offers beautiful grain patterns and rustic looks as well as being known for its very heavy and strong properties. It has a fine and smooth finish to simplify staining. Read on to learn more.

Advantages

  • Most desirable wood for European furniture.
  • Very resistant to corrosion and moisture.
  • The best choice for cabinets, drawers, doors and windows.
  • Can be made into a wide variety of shapes.
  • Works well with varnish.
  • It is very affordable
  • Widely available
  • Great for making heavy grade items
  • Offers a smooth and clear finish and a wonderful natural grain pattern
  • Very durable.

Disadvantages

  • Its heaviness can make it tougher to build contemporary furniture with.
  • It can be more susceptible to shattering and splintering when cut.
  • It may crack if not properly maintained or cleaned.
  • The stain may darken and the two-toned look it produces may be less attractive.

Drawer Boxes

If you’re looking for the best quality cabinet drawer boxes at the best prices there isn’t a better source than Drawer Connection.  We give you your choice of wood and only source the highest quality raw materials.  All of our fabrication is high precision and made to last.  Whether you’re choosing a solid wood with a dovetail joint or a melamine with a dowel joint, every single drawer box is built to last!

What Size Do Dowels Come In?

Dowels are great to reinforce wooden joints or to support shelving units. They are small rods that can be bought either in standard sizes or as large rods and cut down to the required size.

Dowel Sizes

The dimension most commonly referred to when measuring dowels is diameter or width. This is because you need to be able to match your drill bit with the width of the dowels you are using.

Getting The Right Size

Plastic dowels can even be cut to size with a sharp cake knife. The length of the dowel you cut will depend on the DIY task you’ve taken on. For example, if you’re repairing a screw hole, you’ll be cutting a dowel peg that’s roughly the same size as the screw that fits it, whereas making an axle for a toy car will require a dowel that’s as wide as the car you’re making. It’s relatively easy to adjust the length of a dowel because you can just cut them, even if they’re made of metal or plastic. Reducing the width is much more difficult to do accurately.

Availability

Dowels come in a large variety of widths which may be measured in metric (millimetres) or imperial (inches) units. Dowel pegs sizes are usually listed in millimetres, but dowel rods may be listed either in millimetres or inches. Dowel rods usually come in widths between 3.175mm (1/8″) and 50.8mm (2″), but they can be as wide as 304.8mm (12″). They are usually between 304.8mm (12″) and 2.4m (9431/64) long.

Standards

Pre-cut dowels are usually either 6mm (¼”) wide and 30mm (13/16″) long, or 8mm (5/16″) or 10mm (3/8″) wide and 40mm (19/16″) long. When buying specific equipment for dowelling, such as drill bits, drill stops and centre points, these sizes are considered standard.

Source: https://www.wonkeedonkeetools.co.uk/dowels/what-sizes-do-dowels-come-in

Drawer Boxes

If you’re looking for the best quality cabinet drawer boxes at the best prices there isn’t a better source than Drawer Connection.  We give you your choice of wood and only source the highest quality raw materials.  All of our fabrication is high precision and made to last.  Whether you’re choosing a solid wood with a dovetail joint or a melamine with a dowel joint, every single drawer box is built to last!

The Best Wood Choice For Drawer Bottoms

Hardwood plywood is generally considered by experts to be the best wood for drawer bottoms – but it is important to understand the characteristics of plywood, so you know what to look for. Read on to learn more.

Marine plywood, despite its name, is not waterproof and as it is not treated with any chemicals, it not resistant to rot. Nonetheless, it remains good quality made with waterproof glue. better grades of the material are often strong, lightweight and virtually defect free. This makes it ideal for drawer bottoms and also has applications for boat parts and boats.

Other Strong Woods

Woods that have a natural resistance to decaying sich as redwood, cedar, cypress and shorea have a natural resistance to decay but the price and quality of these materils can vary although they are in essence a naturally strong form of wood. Conversely, marine plywood is not pressure-treated and if it is exposed to moisture, it will require a finish that is water resistant.

What Makes Plywood Strong?

Wood veneer is made of sheets or layers known as piles. They arrange the sheets in layers that are perpendicular and this gives the plywood strngth (Golf woods were made from laminated maple for decades and were very strong and durable.) Every piece of plywood has an odd number of layers and the process of cross-lamination arranges the piles in a manner so they are perpendicular to each other. The plywood is then fully bonded with pressure and heat.

Waterproof Glue

If plywood is exposed to moisture, the glue will not fail (one reason it was popular for golf woods) and the wood layers will not delaminate. Not only it is important in drawer boxes but also has marine applications in boats and so on.

Good Plywood

Plywood is usually graded (A,B,C,D) with A being the best – but they are not thought of as being of as high a quality as marine and other forms of hardwood plywood. True hardwood plywood is made with thin layers of one hundred percent hardwood that is normally stronger and harder and has a finer grain the hardwood. Plywood that is sold as being “void-free” lacks voids in the layers of wood. Many thin layers are bettter than fewer thicker layers because the thinner layers relate in a stronger, denser panel of wood.

Drawer Boxes

If you’re looking for the best quality cabinet drawer boxes at the best prices there isn’t a better source than Drawer Connection.  We give you your choice of wood and only source the highest quality raw materials.  All of our fabrication is high precision and made to last.  Whether you’re choosing a solid wood with a dovetail joint or a melamine with a dowel joint, every single drawer box is built to last!

Advantages Of Pinewood

Pine has many advantages as a material for all kinds of furniture and cabinetry. Read on to learn more.

Pricing

Often cheaper than oak, because of the fact pine is fast growing and need less care so they can come to market more quickly and this makes the price lower making it attractive to many people.

Coloring

Its natural light coloring means it looks great inthe home. It is versatile and goes with various wall colors, patterns and other decorations.

Options

Pine can be easily colored or stained and fives you a wide variety of finishing options. Or you can keep it natural with a clearcoat.

Stiffness

As a pretty stiff wood, pine is very strong and durable.

Light Weight

Pine has the advantage of being sturdy and lighter in weight than oak. Its lightweight makes it ideal when you want to move furniture around. It is also very resistant to shock.

Distinctive Looks

With its very distinctive look with dark knots, it is very well worth considering among wood choices.

Drawer Boxes

If you’re looking for the best quality cabinet drawer boxes at the best prices there isn’t a better source than Drawer Connection.  We give you your choice of wood and only source the highest quality raw materials.  All of our fabrication is high precision and made to last.  Whether you’re choosing a solid wood with a dovetail joint or a melamine with a dowel joint, every single drawer box is built to last!

What’s The Best Wood For Cabinetry?

The best wood for cabinetry is widely considered either red oak, poplar, maple, mahogany, or plywood.  Which solid wood type is best for a specific project depends on budget, if the cabinetry will be painted, and personal preference.

Everyone wants to know that the home improvements they’re making are durable and add real value to the property.  So what is the best wood for your cabinets, drawer boxes, and cabinet doors?  

    1. Best Wood For Cabinetry
      1. Cherry, Maple, Ash, Hickory & Oak
      2. Birch, Beech, White Oak, & Red Oak
      3. Walnut & Mahogany
      4. Spruce, Pine, & Fir Softwoods
      5. Plywood
    2. Best Wood For Painted Cabinets
      1. Wood Grain Paint Challenges
    3. Best Wood For Painted Cupboards
    4. Order Cabinet Drawers

Read about each of the different types of wood in this article to judge for yourself which wood type you want for your cabinet doors, cabinet drawers, and home.

Best Wood For Cabinetry

Your bathroom and kitchen are focal points in your home.  That means that your cabinets need to be durable, functional, and attractive quality materials. Boxed or prefabricated cabinets are built using low grade, thin materials that are overlaid with a wood veneer. Cabinets are built using hardwood solids and plywood, and both materials will matter when you are picking what is best.

Cherry, Maple, Ash, Hickory and Oak

Cabinet doors and face frames are often made from solid hardwoods. Wood species such as hickory, maple or beech will resist scratching and denting at a higher degree when compared to other softer species like walnut, alder or mahogany, but they will also cost more.

Hickory and maple for example are two of the hardest wood species that are used for cabinets and are normally more expensive than softer woods like ash or oak. Although imported or exotic species no matter what the density is will normally cost more than domestic hardwoods.

Other exceptions do include domestic hardwoods that are trendy. Cherry for instance, because of the subtle, intricate grain pattern and warm rich color is considered a luxury wood. It will normally demand a higher price than other domestic woods.

Birch, Beech and White or Red Oak

One of the most commonly used hardwoods by cabinetmakers is medium priced red oak that has arched or complex flame grain patterns. White oak has straighter grains but it will cost more than red oak.

Other types of domestic species include beech woods that have straight graining and birch that has streak and bands of brown will be priced lower than beech because of the availability and the lost cost of birch plywood.

Walnut and Mahogany

Other types of commonly used hardwoods are the rich and dark brown walnuts and the straight grained red mahogany. Mahogany gives warmth while walnut, which is similar in cost and hardness to mahogany, happens to add elegance to cabinets.

Other wood species can be stained to match existing colors that are in the home, although some will react to staining better than other wood. Ash, pine, and oak absorb stains evenly. While Birch and maple can blotch if not prepared for stain. Walnut and cherry which are known for their colors, are better left as is.

Spruce, Pine and Fir Softwoods

Cone bearing evergreen trees provide softwoods, which are normally used for structural purposes. Whenever it is used for cabinets, softwood like pine will give a certain look to cabins, cottages, lodges and country settings with the knotty character and soft tones of amber.

Other softwoods like spruce and fir will be straight grained but they are tougher and harder than pine. These are normally used for utility or economy applications such as in shops or garages.

Cabinet Grade Plywood

Plywood is a glued and laminated wood that is engineered and overlaid with hardwood veneer and is normally less than 1/16 inch. The appearance of this is the only difference when it comes to comparing grades which is important for determining cost and quality. Plywood that is designated AA or premium will be the most expensive. It is often called one piece faced, the veneer is rotary cut in a single piece to keep it from splicing.

Grade A plywood is a bit cheaper than AA and the veneer is spliced side by side and color matched to give it consistency. Grades B, C, D, and E will be less expensive and will be lower grade in appearance with each lower level having inconsistent colors or additional streaks. Shop grade or economy plywood is the cheapest and it has allowed damage or defects. At least 85% of shop grade plywood is normally usable with a good cabinet maker that can work around the defects.

What is the best wood for painted cabinets?

Similarly, as any craftsman needs to choose what medium to utilize, woodworkers must choose what wood to work with. The appearance, shading, cost, planned utilize, workability, and maturing conduct are for the most part contemplations.

In any case, so is a wood’s paintability or capacity to take a stain. In the event that recoloring, you need to know how the wood grain will show and how the wood shading influences the shade of the stain. Here’s a snappy guide from the Pros who’ve addressed the inquiry, “What’s the best wood for painted cupboards?”

Wood Grain Paint Challenges

Paint-review wood has a tendency to be of the more tightly grained assortments, for example, hard maple, soft maple, pine, and poplar, among others. Open grain wood has a rougher look and likely needs filler to look great when painted. It’s best to work out of tight-grain woods to keep away from this.

Poplar and delicate maple are well known for most parts of a bureau—confront outlines, end edges, and entryway boards—for the most part because of cost and workability. In any case, a few craftsmen find that poplar marks effectively. It can likewise ingest the principal layer of paint rapidly.

A portion of the other tight-grain woods are somewhat less demanding to work with, yet their accessibility or cost isn’t viewed as a sufficient exchange off. Hard maple can be another great decision, despite the fact that it can move marginally more than different woods with changes in stickiness.

MDF can be utilized for face and end outlines. A few woodworkers utilize it for entryway boards, yet it can be dubious to wrap up. Along these lines, other wood assortments are regularly utilized for rails and stiles. MDF stays prominent as it is steady and hence useful for bigger pieces. Birch plywood or prefinished plywood is another possibility for these more drawn out segments.

So what’s the best wood for painted cupboards?

Similarly, as with most things, you won’t discover any deficiency of assessments, however there seems to be some expansive concession to when the best sorts of wood are for painted cupboards. Tight-grained woods that are workable and solid remain a prevalent decision. Whatever material you pick; the staggering understanding is to set up the wood’s surface first. Utilize filler if necessary, shellac on hitches so they don’t seep through, and be sure to sand over any sharp corner that may not hold the paint. Below is a fast breakdown of the forested areas commonly found in cupboards:

      • Hard Maple: light, dense. Grain: stainable, close grained, and fine textured
      • Hickory: durable, hard, and strong; white to reddish brown. Grain: coarse and straight
      • Cherry: Moderately heavy, strong, and hard; sands smooth. Grain: red and finishes beautifully
      • Soft Maple: strong, hard, and medium density; paint grade. Grain: fine textured, close grained
      • Mahogany: varies in color between medium red to reddish brown. Grain: medium coarse texture, straight to interlocked grain
      • Beech: heavy, medium to hard, pale colored; stains and polishes well. Grain: tight and fine. Similar to birch and maple
      • Alder: Reddish brown color, easily dented. Grain: straight grain, even texture
      • Red Oak: heavy, very hard, and strong. Grain: coarse texture with easy sanding and finishing
      • Red Birch: red in color softer than red oak. Grain: tight grain, easy to finish
      • Douglas Fir: light rosy color that will redden. Grain: tight knotted and close grained
      • White Oak: light to dark brown in color, heavy and hard. Grain: straight grained with medium to coarse texture
      • Knotty Pine: lightweight with tight and small knots. Grain: straight with an even, fine texture

High Quality Cabinet Drawer Boxes

If you’re looking for the best quality cabinet drawer boxes at the best prices there isn’t a better source than Drawer Connection.  We give you your choice of wood and only source the highest quality raw materials.  All of our fabrication is high precision and made to last.  Whether you’re choosing a solid wood with a dovetail joint or a melamine with a dowel joint, every single drawer box is built to last!