Kitchen Remodeling Tips

The new year is a great time to start thinking of about Kitchen Remodeling. Read on to learn more!

Kitchen Remodeling Tips

When remodeling a kitchen, you should consider that things can go wrong and not as planned. Here are a couple of tips to avoid getting burned remodeling your kitchen. A kitchen remodel is kind of a big deal—not something to be addressed hastily. Before you visit a showroom or meet with a contractor, read some kitchen remodeling tips and advice for creating the cooking space you’ve always wanted.

Stay Within Your Budget

Before you start to plan, think about the market, and consider if a low-, medium-, or high-end kitchen remodel makes sense. Costs can run the range from $1,500 for a typical paint and hardware upgrades to $50,000 if you’re going to install expensive countertops and high-end appliances. Understanding your neighborhood will help keep from overspending – you might not get your investment back installing granite in your tiny starter home – or even worse, underspending. You’ll never see Formica in high-end homes, and in fact, it may hinder to your sale.

Stay Away From An Identity Crisis

Don’t attempt to remodel a 50’s ranch-style kitchen into a modern cooking space.  All homes, however unassuming, are built in certain architectural styles. Work with your remodel it, not against it. You’ll end up spending too much money and time on a complete overhaul, and you’ll end up with a kitchen that looks like it belongs in a different home.

Don’t Lose Track Of Trends

There’s constantly something new coming out in the world of kitchen improvements. By staying on top of the newest technological trends and developments, you may be able to find less expensive, more environmental-friendly versions of today’s hottest looks.

Keep Your Plumbing Where It Is

Moving your gas and water lines to accommodate the new configuration of sinks, stoves, ovens, or dishwashers is very costly, especially in older homes. Keep extra cash in your pocket by leaving any pipe-connected elements where they are.

Keep An Eye Out For The Wrong Floor Plan

If your budget allows you to rearrange appliances, be sure to keep your floor plan into consideration. Does it follow the triangular pattern between the refrigerator, stove, and oven? Is your dishwasher next to the sink? If not, you are going to create a mess every time you walk across the kitchen with a dripping dish in your hands

Don’t Trash Your Old Cabinets

If they’re quality wood and still in good shape, you’re in luck. This is one of the first things to check when considering a pre-remodel kitchen because cabinet frames are the most expensive part of the entire kitchen.  It’s quite simple to give restorable cabinets a makeover. There are 3 common ways to repurpose and save money; adding new doors and hardware, re-laminating sides and the front of the cabinets, or repainting. Make sure all the cabinets are cleaned and lightly sanded, then have a professional painter come in to spray them.

Don’t Skimp On New Hardware

Home remodeling stores carry a large selection of door hardware.  Pick knobs and pulls that complement the architectural style. These are an added touch that makes the whole room pop! Remove and replace any old painted hinges with brand new ones. It may be time-consuming but is also very inexpensive.

Benefit From Free Advice

Look at the home improvement centers for free, computer-based design services for help designing your kitchen. These professionals are at the leading edge of today’s remodeling trends, and their services include one-on-one assistance as well as at-home consultations, complete project supervision, and installation services.

Don’t Mismatch Your Appliances

Home remodeling stores carry a large selection of door hardware.  Pick knobs and pulls that complement the architectural style. These are an added touch that makes the whole room pop! Remove and replace any old painted hinges with brand new ones. It may be time consuming but is also very inexpensive.

Get the best attainable faucet, one with a pull-out spray or a gooseneck with removable head. It’s a necessity– and the difference between good and awesome is only $50 -$75. Stick to one consistent fixture finish because mixed finishes can look like mish-mosh.

Don’t Forget Include Sinks And Fixtures In Your Budget

When buying new appliances, stick with the same brand. Fortunately, appliance designers have begun to create good-looking, budget friendly lines that match. With a little homework and some smart shopping, you can find inexpensive appliances that look very high-end – and when they match, you get a designer look for a lot less.

Buy Replacement Kitchen Drawers @ Drawer Connection

Buy cheap replacement kitchen drawers at Drawer Connection.  You can also shop for replacement dovetail drawer boxes and dowel drawer boxes on Drawer Connection’s site.

Cabinet Drawer Measuring

Measuring for cabinet drawers is simple. read on to learn more!

After you’ve consulted the installation instructions for the hardware you plan to use, the first consideration is drawer overlay, which refers to how much your drawer fronts should overlap the cabinet end panels or face frames. If they shouldn’t overlap at all, you want inset fronts. You need to know whether you have overlay or inset drawer fronts to calculate your drawer depth. Inset fronts generally require slightly shallower drawer boxes.

The second thing you need to think about before ordering drawers is the hardware you plan to use. Drawer hardware comes in two basic types:

  1. Side-mount slides attach to the sides of your drawer boxes. You’ll be able to see these slides when the drawer boxes are open. You can get side-mount slides in ¾ or full extension, which refers to how far the drawer boxes pull out of the cabinets. Most side-mount slides require 1/2” to 17/32” of clearance on each side of a drawer. That means each drawer should be 1” to 1-1/16” smaller than the opening to fit properly.
  2. Under-mount slides attach to the bottoms of drawer boxes and can’t be seen when the drawers are open. They’re quite a bit more expensive than most side-mount slides and usually have lots of side-to-side and up-and-down adjustments. Under-mount slides require 3/32” – 5/32” of clearance of each side of your drawers to work correctly. Your drawers should be 3/16” – 5/16” narrower than their openings.

Let’s assume you want to order a drawer box for a face frame cabinet with a 6” tall, 18” wide opening. Your cabinet is 24” deep. You’ll have a half-overlay front that measures 7” x 19”. The size of the drawer front really doesn’t matter, but it’s here to help you understand what half-overlay means.

Because a 24” deep cabinet will have an interior depth that’s slightly less than that dimension, your drawer slides need to be smaller, too. KV’s installation instructions show that the next size down from 24” is 22”, so that’s your slide length and drawer depth.

Allow at least 1/4” of clearance above and below the drawer, giving you a height of 5-1/2” (6” minus 1/4” at top and 1/4” at bottom). Your drawer box should be 17” wide, 5-1/2” tall and 22” deep.

The main thing you should take away from this article is that the only fool-proof way to measure drawer boxes correctly is to consult the specs or installation instructions for the hardware you plan to use. With that disclaimer out of the way, here’s a cheat sheet to drawer boxes and hardware:

  • Drawer boxes for side-mount slides should be 1” – 1-1/16” narrower than the opening. The larger dimension will give you a little room to adjust the slides if necessary.
  • Drawer boxes for under-mount slides need to be 3/16” – 5/16” narrower than the opening, depending on the thickness of the drawer material. Sorry, but you’ll have to consult the specs for details. Take a look at Blum under-mount slides.
  • If you’re going to use under-mount slides, you’ll want to have notches put in the backs to accommodate the hardware.

Source: https://www.cabinetnow.com/how-to/measuring-for-cabinet-drawers/

 Buy Replacement Kitchen Drawers @ Drawer Connection

Buy cheap replacement kitchen drawers at Drawer Connection.  You can also shop for replacement dovetail drawer boxes and dowel drawer boxes on Drawer Connection’s site.

Kitchen Cabinet Reorganization

Kitchen cabinet organization is one of the major focuses in today’s kitchen design and remodeling world.  Having enough space that’s laid out intelligently makes the kitchen more user friendly. Better organization in the kitchen means it will be faster and easier to cook and even clean up.  See all of the great kitchen cabinet organization products and solutions below.

Pot & Pan Organization

Most homes have various sizes of pots and pans.  They typically get stacked inside each other to save space.  This might be a space saver but means you’ve got to dig out the pan or pot you need every time you cook.  Pot and pan organizers rack your pots and pans on their sides and stand them up much the same way a dishwasher does.  This makes better use of the cabinet space and solves the problem of having to lift up 3 or 4 pans to get the one you need.

Spice Organization

Most homes have a wide variety of favorite meals that require a wide variety of spices.  From Turmeric to Tandoori and Vanilla to Thyme you need to be able to find what you need easily and quickly as you cook.  There are a number of great spice organization options.  You can include door mounted tray systems, have a spice tray drawer organizer, or even pull-out spice storage.

Trash Can Pull Out Storage

Most homes are trying to maximize the storage space in the kitchen.  Closets with a garbage can are a wasteful use of space.  Many homeowners prefer to have cabinet trash compactors or pull out trash areas.  This makes it easily accessible yet out of sight.  These solutions also help keep potential garbage smells out of your kitchen.

Kitchen Cabinet Corner Storage

Kitchen cabinet design has always been tricky in the corner of the kitchen.  To solve this problem people use lazy susans, corner drawers, and pull out corners.  All of these solutions focus on making it possible to use the corner space in your kitchen, but still have the items stored easily accessible.

Kitchen Cabinet Appliance Storage

Serious foodies and home chefs typically aren’t satisfied with a toaster and microwave.  They have KitchenAid mixers, Nu-wave grills, and Crockpots.  There typically isn’t space to just leave these appliances out and they can be cumbersome to store.  A metal basket pull out organizer is the perfect solution to where and how to store your kitchen appliances.  This will leave your counter space clear and ready for use.

Under Sink Kitchen Cabinet Organizers

Another spot in the kitchen that frequently gets chaotic and needs some organization is under the sink.  Your dish soap, dishwasher tabs, sponges, brushes, and cleaning supplies are many times simply a mess under the sink.  A cleaning supply caddy with a pullout and handle make it easy to get what you need out or take all of it out for a deep kitchen cleaning.

Kitchen Cabinet Organization & Design

MK Remodeling offers kitchen remodeling services in Phoenix that include detailed kitchen cabinet organization solutions in our designs.  Our team thoughtfully considers your kitchen cabinet needs and creates well laid out cabinet organization solutions that will make it easier and more fun to use your kitchen.  As more and more families are spending time in the kitchen the better organized it is the more you’ll use it and save money over going out for meals.

 Buy Replacement Kitchen Drawers @ Drawer Connection

Buy cheap replacement kitchen drawers at Drawer Connection.  You can also shop for replacement dovetail drawer boxes and dowel drawer boxes on Drawer Connection’s site.

Kitchen Cabinet Replacement Vs. Refacing

Kitchen Cabinet Replacement

  • Existing cabinets are first removed and expert installation specialists level your base cabinets to prevent them from cracking in future years. Wall cabinets are hung and hardware and doors are professionally installed.
  • There are thousands of companies who will replace your cabinets but is an expert job and you want to find a company with a great deal of experience, excellent reviews and a company that guarantees the quality of their work.
  • The average cost for cabinet replacement is $16,000 with prices ranging from $12,000 to $20,000 for the US in 2020.
  • There is nearly always a good time to replace kitchens. When constructing a new house, remodeling your kitchen, building a new addition, creating a kitchen layout, when cabinet boxes are in poor condition, among others.
  • Although it is not the most eco-friendly option, (old material frequently gets landfilled) it is possible to donate good condition cabinets to Habitat for Humanity and recycling yards.

Kitchen Cabinet Refacing or Refinishing

  • There are two elements to cabinet refacing. Obviously, the installation is new drawer doors and faces and the installation of brand new cabinet fixtures. If needed they may be able to replace entire drawer sets.
  • Not as many professionals offer this service compared to cabinet replacements but it is catching on as more homeowners learn about refacing options. It should not be difficult to find an experienced professional in your area who can do a professional job of cabinet refacing.
  • The average cost for cabinet refacing is $8,500 with prices ranging from $7,000 to $10,000 for the US in 2019.
  • Refacing cabinets is a great idea when the cabinet boxes are still in good condition, when the total cost may be an issue, when you are remodeling a home and when you like the current layout of your kitchen.
  • It usually takes a professional around 2 to 4 days to complete the task.
  • Refacing is also very friendly to the environment. During the process, the only items heading to the trash are drawer fronts and cabinet doors.

Kitchen Cabinet Replacement or Refacing – What Is Right For You?

it is always great to have new cabinets, so if you can afford it and it works within your budget plan for your home, new kitchen cabinets will add to the resale value and look great. However, cabinet refacing is a very viable alternative if you do not want to make as large an investment up-front.

Buy Replacement Kitchen Drawers @ Drawer Connection

Buy cheap replacement kitchen drawers at Drawer Connection.  You can also shop for replacement dovetail drawer boxes and dowel drawer boxes on Drawer Connection’s site.

Advantages Of Oak Wood

Oak offers beautiful grain patterns and rustic looks as well as being known for its very heavy and strong properties. It has a fine and smooth finish to simplify staining. Read on to learn more.

Advantages

  • Most desirable wood for European furniture.
  • Very resistant to corrosion and moisture.
  • The best choice for cabinets, drawers, doors and windows.
  • Can be made into a wide variety of shapes.
  • Works well with varnish.
  • It is very affordable
  • Widely available
  • Great for making heavy grade items
  • Offers a smooth and clear finish and a wonderful natural grain pattern
  • Very durable.

Disadvantages

  • Its heaviness can make it tougher to build contemporary furniture with.
  • It can be more susceptible to shattering and splintering when cut.
  • It may crack if not properly maintained or cleaned.
  • The stain may darken and the two-toned look it produces may be less attractive.

Drawer Boxes

If you’re looking for the best quality cabinet drawer boxes at the best prices there isn’t a better source than Drawer Connection.  We give you your choice of wood and only source the highest quality raw materials.  All of our fabrication is high precision and made to last.  Whether you’re choosing a solid wood with a dovetail joint or a melamine with a dowel joint, every single drawer box is built to last!

What Size Do Dowels Come In?

Dowels are great to reinforce wooden joints or to support shelving units. They are small rods that can be bought either in standard sizes or as large rods and cut down to the required size.

Dowel Sizes

The dimension most commonly referred to when measuring dowels is diameter or width. This is because you need to be able to match your drill bit with the width of the dowels you are using.

Getting The Right Size

Plastic dowels can even be cut to size with a sharp cake knife. The length of the dowel you cut will depend on the DIY task you’ve taken on. For example, if you’re repairing a screw hole, you’ll be cutting a dowel peg that’s roughly the same size as the screw that fits it, whereas making an axle for a toy car will require a dowel that’s as wide as the car you’re making. It’s relatively easy to adjust the length of a dowel because you can just cut them, even if they’re made of metal or plastic. Reducing the width is much more difficult to do accurately.

Availability

Dowels come in a large variety of widths which may be measured in metric (millimetres) or imperial (inches) units. Dowel pegs sizes are usually listed in millimetres, but dowel rods may be listed either in millimetres or inches. Dowel rods usually come in widths between 3.175mm (1/8″) and 50.8mm (2″), but they can be as wide as 304.8mm (12″). They are usually between 304.8mm (12″) and 2.4m (9431/64) long.

Standards

Pre-cut dowels are usually either 6mm (¼”) wide and 30mm (13/16″) long, or 8mm (5/16″) or 10mm (3/8″) wide and 40mm (19/16″) long. When buying specific equipment for dowelling, such as drill bits, drill stops and centre points, these sizes are considered standard.

Source: https://www.wonkeedonkeetools.co.uk/dowels/what-sizes-do-dowels-come-in

Drawer Boxes

If you’re looking for the best quality cabinet drawer boxes at the best prices there isn’t a better source than Drawer Connection.  We give you your choice of wood and only source the highest quality raw materials.  All of our fabrication is high precision and made to last.  Whether you’re choosing a solid wood with a dovetail joint or a melamine with a dowel joint, every single drawer box is built to last!

The Best Wood Choice For Drawer Bottoms

Hardwood plywood is generally considered by experts to be the best wood for drawer bottoms – but it is important to understand the characteristics of plywood, so you know what to look for. Read on to learn more.

Marine plywood, despite its name, is not waterproof and as it is not treated with any chemicals, it not resistant to rot. Nonetheless, it remains good quality made with waterproof glue. better grades of the material are often strong, lightweight and virtually defect free. This makes it ideal for drawer bottoms and also has applications for boat parts and boats.

Other Strong Woods

Woods that have a natural resistance to decaying sich as redwood, cedar, cypress and shorea have a natural resistance to decay but the price and quality of these materils can vary although they are in essence a naturally strong form of wood. Conversely, marine plywood is not pressure-treated and if it is exposed to moisture, it will require a finish that is water resistant.

What Makes Plywood Strong?

Wood veneer is made of sheets or layers known as piles. They arrange the sheets in layers that are perpendicular and this gives the plywood strngth (Golf woods were made from laminated maple for decades and were very strong and durable.) Every piece of plywood has an odd number of layers and the process of cross-lamination arranges the piles in a manner so they are perpendicular to each other. The plywood is then fully bonded with pressure and heat.

Waterproof Glue

If plywood is exposed to moisture, the glue will not fail (one reason it was popular for golf woods) and the wood layers will not delaminate. Not only it is important in drawer boxes but also has marine applications in boats and so on.

Good Plywood

Plywood is usually graded (A,B,C,D) with A being the best – but they are not thought of as being of as high a quality as marine and other forms of hardwood plywood. True hardwood plywood is made with thin layers of one hundred percent hardwood that is normally stronger and harder and has a finer grain the hardwood. Plywood that is sold as being “void-free” lacks voids in the layers of wood. Many thin layers are bettter than fewer thicker layers because the thinner layers relate in a stronger, denser panel of wood.

Drawer Boxes

If you’re looking for the best quality cabinet drawer boxes at the best prices there isn’t a better source than Drawer Connection.  We give you your choice of wood and only source the highest quality raw materials.  All of our fabrication is high precision and made to last.  Whether you’re choosing a solid wood with a dovetail joint or a melamine with a dowel joint, every single drawer box is built to last!

Advantages Of Pinewood

Pine has many advantages as a material for all kinds of furniture and cabinetry. Read on to learn more.

Pricing

Often cheaper than oak, because of the fact pine is fast growing and need less care so they can come to market more quickly and this makes the price lower making it attractive to many people.

Coloring

Its natural light coloring means it looks great inthe home. It is versatile and goes with various wall colors, patterns and other decorations.

Options

Pine can be easily colored or stained and fives you a wide variety of finishing options. Or you can keep it natural with a clearcoat.

Stiffness

As a pretty stiff wood, pine is very strong and durable.

Light Weight

Pine has the advantage of being sturdy and lighter in weight than oak. Its lightweight makes it ideal when you want to move furniture around. It is also very resistant to shock.

Distinctive Looks

With its very distinctive look with dark knots, it is very well worth considering among wood choices.

Drawer Boxes

If you’re looking for the best quality cabinet drawer boxes at the best prices there isn’t a better source than Drawer Connection.  We give you your choice of wood and only source the highest quality raw materials.  All of our fabrication is high precision and made to last.  Whether you’re choosing a solid wood with a dovetail joint or a melamine with a dowel joint, every single drawer box is built to last!

What’s The Best Wood For Cabinetry?

The best wood for cabinetry is widely considered either red oak, poplar, maple, mahogany, or plywood.  Which solid wood type is best for a specific project depends on budget, if the cabinetry will be painted, and personal preference.

Everyone wants to know that the home improvements they’re making are durable and add real value to the property.  So what is the best wood for your cabinets, drawer boxes, and cabinet doors?  

    1. Best Wood For Cabinetry
      1. Cherry, Maple, Ash, Hickory & Oak
      2. Birch, Beech, White Oak, & Red Oak
      3. Walnut & Mahogany
      4. Spruce, Pine, & Fir Softwoods
      5. Plywood
    2. Best Wood For Painted Cabinets
      1. Wood Grain Paint Challenges
    3. Best Wood For Painted Cupboards
    4. Order Cabinet Drawers

Read about each of the different types of wood in this article to judge for yourself which wood type you want for your cabinet doors, cabinet drawers, and home.

Best Wood For Cabinetry

Your bathroom and kitchen are focal points in your home.  That means that your cabinets need to be durable, functional, and attractive quality materials. Boxed or prefabricated cabinets are built using low grade, thin materials that are overlaid with a wood veneer. Cabinets are built using hardwood solids and plywood, and both materials will matter when you are picking what is best.

Cherry, Maple, Ash, Hickory and Oak

Cabinet doors and face frames are often made from solid hardwoods. Wood species such as hickory, maple or beech will resist scratching and denting at a higher degree when compared to other softer species like walnut, alder or mahogany, but they will also cost more.

Hickory and maple for example are two of the hardest wood species that are used for cabinets and are normally more expensive than softer woods like ash or oak. Although imported or exotic species no matter what the density is will normally cost more than domestic hardwoods.

Other exceptions do include domestic hardwoods that are trendy. Cherry for instance, because of the subtle, intricate grain pattern and warm rich color is considered a luxury wood. It will normally demand a higher price than other domestic woods.

Birch, Beech and White or Red Oak

One of the most commonly used hardwoods by cabinetmakers is medium priced red oak that has arched or complex flame grain patterns. White oak has straighter grains but it will cost more than red oak.

Other types of domestic species include beech woods that have straight graining and birch that has streak and bands of brown will be priced lower than beech because of the availability and the lost cost of birch plywood.

Walnut and Mahogany

Other types of commonly used hardwoods are the rich and dark brown walnuts and the straight grained red mahogany. Mahogany gives warmth while walnut, which is similar in cost and hardness to mahogany, happens to add elegance to cabinets.

Other wood species can be stained to match existing colors that are in the home, although some will react to staining better than other wood. Ash, pine, and oak absorb stains evenly. While Birch and maple can blotch if not prepared for stain. Walnut and cherry which are known for their colors, are better left as is.

Spruce, Pine and Fir Softwoods

Cone bearing evergreen trees provide softwoods, which are normally used for structural purposes. Whenever it is used for cabinets, softwood like pine will give a certain look to cabins, cottages, lodges and country settings with the knotty character and soft tones of amber.

Other softwoods like spruce and fir will be straight grained but they are tougher and harder than pine. These are normally used for utility or economy applications such as in shops or garages.

Cabinet Grade Plywood

Plywood is a glued and laminated wood that is engineered and overlaid with hardwood veneer and is normally less than 1/16 inch. The appearance of this is the only difference when it comes to comparing grades which is important for determining cost and quality. Plywood that is designated AA or premium will be the most expensive. It is often called one piece faced, the veneer is rotary cut in a single piece to keep it from splicing.

Grade A plywood is a bit cheaper than AA and the veneer is spliced side by side and color matched to give it consistency. Grades B, C, D, and E will be less expensive and will be lower grade in appearance with each lower level having inconsistent colors or additional streaks. Shop grade or economy plywood is the cheapest and it has allowed damage or defects. At least 85% of shop grade plywood is normally usable with a good cabinet maker that can work around the defects.

What is the best wood for painted cabinets?

Similarly, as any craftsman needs to choose what medium to utilize, woodworkers must choose what wood to work with. The appearance, shading, cost, planned utilize, workability, and maturing conduct are for the most part contemplations.

In any case, so is a wood’s paintability or capacity to take a stain. In the event that recoloring, you need to know how the wood grain will show and how the wood shading influences the shade of the stain. Here’s a snappy guide from the Pros who’ve addressed the inquiry, “What’s the best wood for painted cupboards?”

Wood Grain Paint Challenges

Paint-review wood has a tendency to be of the more tightly grained assortments, for example, hard maple, soft maple, pine, and poplar, among others. Open grain wood has a rougher look and likely needs filler to look great when painted. It’s best to work out of tight-grain woods to keep away from this.

Poplar and delicate maple are well known for most parts of a bureau—confront outlines, end edges, and entryway boards—for the most part because of cost and workability. In any case, a few craftsmen find that poplar marks effectively. It can likewise ingest the principal layer of paint rapidly.

A portion of the other tight-grain woods are somewhat less demanding to work with, yet their accessibility or cost isn’t viewed as a sufficient exchange off. Hard maple can be another great decision, despite the fact that it can move marginally more than different woods with changes in stickiness.

MDF can be utilized for face and end outlines. A few woodworkers utilize it for entryway boards, yet it can be dubious to wrap up. Along these lines, other wood assortments are regularly utilized for rails and stiles. MDF stays prominent as it is steady and hence useful for bigger pieces. Birch plywood or prefinished plywood is another possibility for these more drawn out segments.

So what’s the best wood for painted cupboards?

Similarly, as with most things, you won’t discover any deficiency of assessments, however there seems to be some expansive concession to when the best sorts of wood are for painted cupboards. Tight-grained woods that are workable and solid remain a prevalent decision. Whatever material you pick; the staggering understanding is to set up the wood’s surface first. Utilize filler if necessary, shellac on hitches so they don’t seep through, and be sure to sand over any sharp corner that may not hold the paint. Below is a fast breakdown of the forested areas commonly found in cupboards:

      • Hard Maple: light, dense. Grain: stainable, close grained, and fine textured
      • Hickory: durable, hard, and strong; white to reddish brown. Grain: coarse and straight
      • Cherry: Moderately heavy, strong, and hard; sands smooth. Grain: red and finishes beautifully
      • Soft Maple: strong, hard, and medium density; paint grade. Grain: fine textured, close grained
      • Mahogany: varies in color between medium red to reddish brown. Grain: medium coarse texture, straight to interlocked grain
      • Beech: heavy, medium to hard, pale colored; stains and polishes well. Grain: tight and fine. Similar to birch and maple
      • Alder: Reddish brown color, easily dented. Grain: straight grain, even texture
      • Red Oak: heavy, very hard, and strong. Grain: coarse texture with easy sanding and finishing
      • Red Birch: red in color softer than red oak. Grain: tight grain, easy to finish
      • Douglas Fir: light rosy color that will redden. Grain: tight knotted and close grained
      • White Oak: light to dark brown in color, heavy and hard. Grain: straight grained with medium to coarse texture
      • Knotty Pine: lightweight with tight and small knots. Grain: straight with an even, fine texture

High Quality Cabinet Drawer Boxes

If you’re looking for the best quality cabinet drawer boxes at the best prices there isn’t a better source than Drawer Connection.  We give you your choice of wood and only source the highest quality raw materials.  All of our fabrication is high precision and made to last.  Whether you’re choosing a solid wood with a dovetail joint or a melamine with a dowel joint, every single drawer box is built to last!

How To Fix A Broken Drawer Slide

To fix a broken drawer slide try adjusting the drawer slides to see if that will solve the problem.  If not you can easily and inexpensively replace them.


A drawer in your kitchen or bathroom that doesn’t open smoothly is annoying.

It’s possible to repair or replace the drawer slides to make them glide with ease.

Read this post to learn how to fix or replace your drawer slides.


How To Fix Drawer Slides

If you’re searching Google for “How to fix a broken drawer slide” you’ve got a drawer that isn’t opening smoothly, is rubbing against the frame, or is just simply stuck.  The drawers in our kitchens are used, abused, and relied upon to hold everything we need.  Older hardware might have small wheels, flimsy construction, worn out bearings or rollers, and need repair.  There are replacement drawer slides made for virtually every imaginable drawer and cabinet design.

Types Of Drawer Slides

There are 3 basic designs built by many manufactures in different materials.  The three main types are side mount, bottom mount, and bottom mount single.

Side Mount Drawer Slides

Side-mount drawer slides are mounted on the side of the drawer box and telescope out to allow the drawer to extend further than a bottom mount drawer slide.  These drawer slides are generally rated to handle more weight and are attached either half way up the side of the box, or at the bottom.  To know for sure which design you have, if it doesn’t telescope, it isn’t a side mount drawer slide.

Bottom Mount Drawer Slides

Bottom Mount or Under Mounted drawer slides are one of the most common types of drawer slides.  As the name suggests the slides are mounted to the drawer and cabinet under the drawer on a track. There are two common configurations of bottom mount drawer slides, one is flat and attaches at the side, the other is bent at 90° and fits over the edge of the drawer.   The key element to knowing which you have is if the track attaches to the bottom of the drawer, or not.

Bottom Mount Single Drawer Slides

In some cases a bottom mount single drawer slide would have been selected for your kitchen.  It is a economy version of a bottom mount drawer slide and features a single centered mount for the drawer to attach to the cabinetry.  Some have a corresponding track, while others just have a wheel that fits into the track. Typically this is a mount used for inexpensive cabinetry and has lightweight drawers.

Adjust Before Replacing Drawer Slides

If you are experiencing issues with your drawers there might be an easy fix.  Drawers open smoothly when the slides are adjusted correctly.  Over time and with use they might come out of alignment and a simple adjustment may return your drawer slides to perfect working order.

Drawer slide adjustments are done via oval shaped screw adjustments found at the back of drawers.  Fit your slides or wheels into the cabinet and slide the drawer in the cabinet and move it back and forth a few times.

If you notice it is too tight, rubs the side, or sticks you should loosen the screws and tap the drawer in whichever direction will resolve the sticking or rubbing. Once your drawer will slide in and out smoothly you should re-tighten the screws.

How To Replace Tracks & Drawer Slides

To replace your slides and tracks you need to identify the type of slide you have, make sure you either identify what size you have or measure, and then disconnect the drawer and replace the hardware.

Measure Twice, Buy Once

Before ordering new drawer slides make sure you know what type you have and what size you need.  Most times the length is stamped on the side of slides.  If it isn’t make sure you measure it and replace it with a slide of the same size.  This saves wasted time, money, and frustration.

Slide Labeling

Drawer slides sold today carry labeling for installation.  After you’ve removed your old hardware inspect your new slides for stamps.  You will find markings DL (drawer left) AND DR (drawer right). You will also see pieces that connect your drawer to the cabinetry marked with CL (cabinet left) and CR (cabinet right).

How To Disconnect Slides

Side mount slides have a tab or lever which will release the drawer typically located about halfway down the side of the drawer when in the open position. Bottom mount slides generally just pull out by jiggling the drawer, tilting it slightly, and in some cases might have a tab that needs to be pushed to release it from the track.

Drawer Slide Replacement Steps

Follow these drawer slide replacement instructions step by step to make replacing your drawer slides a breeze.  Replacing the drawers is pretty straight forward, remove old, install new, and ensure the adjustment is perfect.

Step 1 – Remove Drawer & Old Drawer Slides

Take the drawer out of the cabinet by removing all of the screws.  Make sure you buy new slides of the same design and have openings that match the size and position of the screws.  It saves a lot of effort if you use a handheld power tool to remove the hardware.  Ensure that you set the tension lower when reattaching your screws to prevent splintering of your drawers.

Step 2 – Match Up New Slides & Attach

Take your new drawer slides out of the packaging and read the labels to sort them into sets of right and left hardware.  Attach your tracks and slides to the cabinets and drawers with your driver with the screws that came with the new hardware.  Make sure you don’t over tighten the adjustment screws which are located at each end.  Place screws in these areas but don’t tighten them down.

Step 3 – Install New Drawer, Test, Adjust

Slide the drawer into and out of the cabinetry and pay close attention to if it is straight, rubbing anywhere, or if it is sticking.  If so make sure you loosen the adjustment screws in the oval shaped holes and tap it in the direction which will resolve the problem.  Always test and adjust until the drawer slides easily and smoothly, then tighten down your adjustment screws.

Buy New Drawer Slides & Drawer Boxes

If your drawer slides are worn out or you need new drawer boxes DC Drawers is your source for high quality drawer slides, and the best drawer boxes.

We offer the top brands of new and replacement drawer slides and custom made drawer boxes.  In addition we offer in drawer power outlets and many other cabinet drawer convenience options.  Read about how you can get cheap drawer boxes that are the finest quality at the best prices.

Shop: New & Replacement Drawer Slides