DIY Cabinet Installation

Tips on how to properly install cabinets. With these expert tips, you’ll be able to hang kitchen wall cabinets and install island cabinets.

First, make a mark on the wall.

A proper layout is the foundation of a good cabinet installation. Draw a straight line from the highest point on the floor to the top of the base cabinets. Draw another line for the bottom of the upper cabinets 19-1/2 in. up from that line. On the wall, label the placement of the kitchen cupboards and appliances. To line up the edge of the first cabinet to be installed, draw a vertical line. Finally, as you begin a project on how to install kitchen cabinets, mark the stud locations.

Place the First Cabinet in the Correct Position

Set the first cabinet 1/4 inch away from the positioning line and shim the base until the top is level from front to back and the top is even with the horizontal line. Anchor it with 2-1/2-in. screws driven through the back into the wall studs.

Remove the doors and drawers from the cabinet.

We’ve all seen painting efforts when the hinges and hardware are painted and the drawer interiors are slopped with paint. It’s tempting to start your how to paint kitchen cabinets project by leaving the doors in place, but removing them, as well as all the hardware, will result in a much neater and more professional-looking work. Many modern cabinets have drawer fronts that can be removed by unscrewing a few screws. If your drawer fronts are attached to the drawer and can’t be removed, cover the drawer sides and bottom with masking tape if you don’t want to paint them.

Large Shim Bows

Most of the time, you may shim the cabinets as you go, but if the wall has a significant bow (more than 3/8 in. ), shim it out before hanging the cabinet. If you don’t, you risk accidently pulling the back of the cabinet off when securing it. Hold a level against the wall and move a shim up from the bottom (when doing the top side, go in from the top) until it’s snug. Then secure it with pins or tape.

Starting with the upper cabinets is a good place to start.

When you’re not dangling much over the base cabinets, it’s easier to hang the uppers. Start by resting the upper cabinets on a ledger board to ensure a nice, straight alignment and save the frustration of keeping the cabinets in place while screwing them to the wall. Install the bottom kitchen cabinets after the top cabinets have been placed.

Drill, clamp, and fasten

When joining two cabinets, make sure the face frames are aligned and clamped together. At this point, both cabinets should be connected to the wall, although you may need to loosen one of them to get the frames to line up exactly. Clamps with hand-screws do not flex, and less flex equals a tighter grip. Before connecting them together with a 2-1/2-in. screw, drill a 1/8-in. hole. Drill and place the screw head in the cabinet that is least obvious of the two.

For scribing, use a block of wood.

Finding the biggest space between the outside of the cabinet and the wall is another stage in how to install cabinets. Make a pencil note on your filler strip with that measurement (measure over right to left in this case). Clamp the filler flush with the inside of the vertical rail of the cabinet. Make a scribing block the same size as the distance between the wall and your pencil mark. Trace a pencil line down the filler strip with your block. On the filler strip, masking tape makes the pencil line stand out and protects the finish from the saw table.

Use high-quality cabinet screws.

The R4 self-countersinking screw from GRK is the go-to cabinet mounting screw for many top cabinet makers. You’ll pay the price, but why save money on screws when you’re spending thousands on cabinets? Use drywall screws at all costs—they’ll only pop off and leave you with an extra hole.

Shim After Fastening the Back

Align the base cabinets with the wall’s level line. Attach the cabinets’ backs to that line. Use shims to level the sides of the cabinets once the backs are level. Take your time with this step; no one wants eggs to roll off a tilted counter.

Calculate the Disparity

At the top and bottom, measure the distance between the wall and the end cabinets. Draw a cutting line on the backside of a filler strip and add 1/16 in. to each measurement.

Filler Strip should be cut

Clamp the filler strip and cut it with a 10-degree bevel from the backside, so the “keeper” piece’s wide edge is facing the front.

The Filler should be fitted and installed.

Fit the infill strip to the bevel and plane the sharp edge until it fits precisely. Place the strip on the cabinet frame, pre-drill, and screw it in place.

For Kitchen Island Installation, use 2x2s to secure cabinets to the floor.

Islands and peninsulas require cabinets to be fixed to the floor. Assemble the island cabinets and arrange them in their proper locations. To begin installing the kitchen island, draw a rough outline of the cabinets on the floor. To account for the thickness of the cabinets, screw 2x2s to the floor 1/2 in. on the inside of the line. Screws are used to secure the island cabinets to the 2x2s. Place flooring blocks under the 2x2s if necessary.

Raise the cabinets to make room for the new flooring.

If you’re putting hardwood or tile after the cabinets, you’ll need to lift the cabinets off the floor, or the dishwasher won’t fit under the counter. Add the distances to the guideline for the base cabinet tops using blocks to approximate the finished floor height. Hold the blocks back from the front of the room a little to allow the flooring to tuck underneath. Your flooring crew will be ecstatic.

 Buy Replacement Kitchen Drawers @ Drawer Connection

Buy cheap replacement kitchen drawers at Drawer Connection.  You can also shop for replacement dovetail drawer boxes and dowel drawer boxes on Drawer Connection’s site.

Kitchen Drawer Replacements

If you are searching for “How To Replace Kitchen Drawers“, “Replace Kitchen Drawers“, or “Replace Kitchen Cabinet Drawers“; Drawer Connection can help!  We will also show you how to order a replacement drawer, or build the drawer yourself!

How To Replace Kitchen Drawers

Accidents happen and if you’ve got a broken drawer in your kitchen you’ll want to fix it so you don’t have items falling out of your drawers.  Parts of homes wear out and the drawers in our kitchens are no different. When they break it can be frustrating to lose the storage space and an eyesore having an open gap.

Some “quick-and-dirty” handymen will do things like nail or glue the drawer front back in place and just forget there ever was a drawer, perhaps to make a tee time or get back to watching TV. Learning how to replace kitchen drawers need not be a painful project, let us show you how here.

Kitchen Drawer Replacement Steps

Use this step by step guide to learn how to replace kitchen drawers and where to buy replacement drawer boxes:

1. Measure The Replacement

To get started you will need to know the size of the replacement you need. Get the height, width, and depth of the opening for the replacement drawer.  Take off an inch for your height and width measurements and at minimum of a half inch from the depth which will allow for easy fitting and drawer slides.

2. Build or Buy a Replacement Drawer Box

Drawer boxes are typically custom built for each kitchen so heading down to the local Walmart to pick up a replacement isn’t an option. To get a replacement that will work you will either need to build a replacement, have a friend do it, or order a drawer box from a professional.

Custom made cheap replacement cabinet drawers can be made in your choice of material, using either dovetail joints or dowel joints, in exactly the size you need.  A replacement drawer box measuring 18” wide by 20” deep by 4” high costs less than $30 dollars from Drawer Connection.

DIY Kitchen Drawer Replacement

Step 1. – Remove the broken drawer out of the cabinetry and put it on a table.  Take the drawer front off by removing the screws that hold it in place.

Step 2. – Flip the drawer over and remove the metal runners from the sides of the drawer.  If the bottom of the drawer falls out, just set it aside.

Step 3. – Tap on all the sides of the drawer to separate it into the 5 sections that make up a drawer, the 2 sides, front, back, and bottom.

Step 4. – Measure the sections of your drawer and use your table saw to rip new replacement sections.  You’ll need to match the lengths and widths of all the the sections.  The front, back, sides, and bottom need to be exact so the runners can be replaced and the drawer will fit correctly.

Step 5. – Using a 1/4 inch dado blade for your table saw prepare your table saw by setting the bland and fence to 1/4 inch.  Run the front, back, and sides through the saw to create a channel in each of the pieces.

Step 6. – Set all four of your sections together, as if they were already put together.  The side pieces should sit on the sides of the front and back sections.  The channel from step 5 should all sit at the bottom of the drawer at the same height.  Measure the inside of the width and length of the drawer and add 1/2 inch to each measurement.  Cut a section of 1/4 plywood to those measurements to be the bottom of your drawer.

Step 7. – Get some wood glue and run a bead where the drawer bottom will sit.  Set the bottom into the channel made for it ensuring there’s a nice coating of wood glue.  Use clamps to hold all of the sections together until the glue dries.  It’s a good idea to wipe off any excess glue at this stage.

Step 8. – Drill holes for the drawer front screws to go through that are 3/16ths thick.  Using screws that are 1 1/4″ attach the front back to the drawer box.  Reattach the metal runners on the drawer and screw them into lace using 3/4 screws.  Set your DIY drawer into place back in the cabinetry and you’re done.d

3. Buying Drawer Slides To Match

The next step is making sure you have drawer slides that match your drawer box depth. You can choose from inexpensive roller slides to ball bearing slides that have soft close and smooth opening features. Most homeowners prefer buying the bottom-mount style drawer slides as they have a piece which wraps around the lower edges of the drawer box and makes for easier installation. There are cases where old hardware from the slides is still intact and can be reused, but many homeowners prefer starting fresh when repairing their cabinet drawers.

4. Prepping The Work Area

Depending on why the drawer broke, and how quick and dirty the repairs where you might have very little work, or a lot of work to do here. If there is any broken wood or hardware it should be removed and replaced. This can mean any glue that was used as a band-aid to hold the drawer front on the face of the cabinets, or it can mean removing and replacing broken or splintered wood inside your cabinets to have a solid area to secure your new drawer.  For glues you can try heating the adhesive up with a blow dryer or you can simply use a scraper to work the glue off and then sand & repaint the area.

5. Installing The New Drawer Box

Once your drawer box arrives, you will want to wait to attach the drawer front until the drawer box is installed and sliding back and forth correctly.  It can be a bit tricky to align the drawer front right, using double-sided tape to tack the pieces together saves time and effort. When installing the drawer ensure that the gaps on the top, bottom, and sides are equal. Once you are sure the box is installed right you can use at least 2 screws to secure the drawer front to the drawer box, from the inside of the drawer.

Buy Replacement Kitchen Drawers @ Drawer Connection

Buy cheap replacement kitchen drawers at Drawer Connection.  You can also shop for replacement dovetail drawer boxes and dowel drawer boxes on Drawer Connection’s site.

Kitchen Cabinet Reorganization 2021

Kitchen cabinet organization in 2021 is one of the major focuses in today’s kitchen design and remodeling world.  Having enough space that’s laid out intelligently makes the kitchen more user friendly. Better organization in the kitchen means it will be faster and easier to cook and even clean up.  See all of the great kitchen cabinet organization products and solutions below.

Pot & Pan Organization

Most homes have various sizes of pots and pans.  They typically get stacked inside each other to save space.  This might be a space saver but means you’ve got to dig out the pan or pot you need every time you cook.  Pot and pan organizers rack your pots and pans on their sides and stand them up much the same way a dishwasher does.  This makes better use of the cabinet space and solves the problem of having to lift up 3 or 4 pans to get the one you need.

Spice Organization

Most homes have a wide variety of favorite meals that require a wide variety of spices.  From Turmeric to Tandoori and Vanilla to Thyme you need to be able to find what you need easily and quickly as you cook.  There are a number of great spice organization options.  You can include door mounted tray systems, have a spice tray drawer organizer, or even pull-out spice storage.

Trash Can Pull Out Storage

Most homes are trying to maximize the storage space in the kitchen.  Closets with a garbage can are a wasteful use of space.  Many homeowners prefer to have cabinet trash compactors or pull out trash areas.  This makes it easily accessible yet out of sight.  These solutions also help keep potential garbage smells out of your kitchen.

Kitchen Cabinet Corner Storage

Kitchen cabinet design has always been tricky in the corner of the kitchen.  To solve this problem people use lazy susans, corner drawers, and pull out corners.  All of these solutions focus on making it possible to use the corner space in your kitchen, but still have the items stored easily accessible.

Kitchen Cabinet Appliance Storage

Serious foodies and home chefs typically aren’t satisfied with a toaster and microwave.  They have KitchenAid mixers, Nu-wave grills, and Crockpots.  There typically isn’t space to just leave these appliances out and they can be cumbersome to store.  A metal basket pull out organizer is the perfect solution to where and how to store your kitchen appliances.  This will leave your counter space clear and ready for use.

Under Sink Kitchen Cabinet Organizers

Another spot in the kitchen that frequently gets chaotic and needs some organization is under the sink.  Your dish soap, dishwasher tabs, sponges, brushes, and cleaning supplies are many times simply a mess under the sink.  A cleaning supply caddy with a pullout and handle make it easy to get what you need out or take all of it out for a deep kitchen cleaning.

Kitchen Cabinet Organization & Design

MK Remodeling offers kitchen remodeling services in Phoenix that include detailed kitchen cabinet organization solutions in our designs.  Our team thoughtfully considers your kitchen cabinet needs and creates well laid out cabinet organization solutions that will make it easier and more fun to use your kitchen.  As more and more families are spending time in the kitchen the better organized it is the more you’ll use it and save money over going out for meals.

 Buy Replacement Kitchen Drawers @ Drawer Connection

Buy cheap replacement kitchen drawers at Drawer Connection.  You can also shop for replacement dovetail drawer boxes and dowel drawer boxes on Drawer Connection’s site.

Kitchen Cabinet Buying Guide 2021

Remodeling your home can be intimidating as you want to make the best decisions.

It’s possible with some foresight to make great choices for kitchen cabinets.

This post will help you explore what to consider before buying your new kitchen cabinetry.


Buying New Kitchen Cabinets

Before you being shopping for your new kitchen cabinets, ensure that you have a plan for the renovation of your kitchen. You need to identify the priorities and goals. You also need to have a clear vision of what the kitchen will look like, after exploring different kitchen layouts and designs as well as planning storage and space. Lastly, you need a budget that you can work with.

Factors To Consider When Selecting New Cabinets:

  • Exact measurements of appliances involved with the new design
  • The budget
  • What type of layout will be used
  • Which improvements are standard for other homes in the area
  • How long will you be staying in the home?

Planning and Designing the Space

Kitchen cabinetry is a big part of designing a home and it remains an important part of measuring the value of the home. But, there is a lot to consider than the material, price and style selection. The most basic remodel can be quite costly and time consuming, so take the steps below before you begin considering products and materials.

Step 1 – Addressing resale issues

Keep your improvements consistent with the market data of other homes in the area. Think about if the space will be a resale, rental or a place that you will stay in and love for the rest of your life. It is vital that you decide the amount of time that you plan to stay in the home.

Step 2 – Determining the Scope

This really depends on your budget and the current condition of the kitchen. If your space just needs a bit of sprucing up without changing the major appliances or layout, replacing cabinet doors or painting the kitchen a new color can go a long way. When faced with cabinetry that isn’t sturdy, new construction or layout issues, you want to have new cabinetry.

Step 3 – Deciding on a layout for the kitchen

Cabinetry for the kitchen is a convenient and practical work space in any home. Before selecting a look, begin with an accurate floor plan that has been scaled with the existing space with the windows, door and other types of architectural dimensions. The location of the utilities like water and sewer connections and electricity are important to note especially if the remodel will involve any spatial reconfiguration.

Plans need to establish the location of cook-top ventilation, gas piping, air and heating registers, and electrical outlets. You will need to confirm the exact measurements of any existing or new appliances that will in the new design, which include the range, hood, refrigerator, microwave, under-cabinet wine cooler, sinks, ice makers, and dishwasher before picking cabinetry.

Step 4 – Sketching the plan

Devise a rough sketch which arranges the appliances with the most efficient use of space. Be sure to keep it simple yet accessible.  There needs to be a good path between the work triangle – refrigerator, sink, and range. Placement of task centers, appliances, accessories, and storage as well as how often they are used need to be considered. Common kitchen layouts are straight, U-shape, L-shape, island, and galley.

Step 5 – Submitting Your Design

Unless you’re a remodeling contractor by trade most homeowners choose to submit their designs to home remodeling companies.  With a rough idea of what a homeowner wants a professional kitchen remodeling consultant can help you make your dream a reality and avoid issues with building codes.  They can also help you avoid high cost remodeling decisions such as moving plumbing, electrical, and tearing down load bearing walls.  When it comes to replacing cabinetry these can be concerns, especially when you’re changing the space considerably.

Buy Replacement Kitchen Drawers @ Drawer Connection

Buy cheap replacement kitchen drawers at Drawer Connection.  You can also shop for replacement dovetail drawer boxes and dowel drawer boxes on Drawer Connection’s site.

Kitchen Cabinet Costs 2021

Kitchen cabinets costs about $650 with average prices of installation ranging from $100 to $1200 in the US for 2021, according to HomeAdvisor.com.

A kitchen cabinet helps define the appearance and usefulness of your kitchen. If you have an outdated or hard to use kitchen design, your kitchen might be falling short of its possibilities as the leisure and meal prep focus of your house. Installing new kitchen cabinets will enhance its looks and convenience – and boost the charm of your house.

Kitchen Cabinet Prices Per Linear Foot

The linear foot price of $100 to $1,200 will include everything from traditional to premium custom cabinet alternatives.

Traditional Kitchen Cabinets

A traditional cabinet is the most budget-friendly choices accessible to homeowners at $100 to $300 per linear foot installed, or $50 to $100 per linear foot for the materials themselves. Traditional or builder’s-quality construction has fewer design choices, but the cost is significantly lower than semi custom and custom alternatives.

  • Pro: Budget-friendly price.
  • Con: Insufficient design choices, and quality problems.

Semi Custom Kitchen Cabinets Cost

When you have a bigger budget or want custom sizing or beauty, semi-custom designs provide a wider assortment of choices from $150 to $650 per linear foot installed. The materials themselves are priced $75 to $400 per linear foot. Semi-traditional is ideal for homeowners wanting unique, longer lasting types without the larger cost of custom designs.

  • Pro: Reasonably priced, additional design and measurement choices.
  • Con: Insufficiency of unique designs and materials.

Custom Kitchen Cabinets

Custom kitchen cabinets are priced at $500 to $1,200 per linear foot installed. Materials themselves cost between $300 and $750 per linear foot. They are ideal for oddly shaped kitchens or certain design and convenience needs. While custom installations meet your precise specifications, you could expect a considerable cost increase.

  • Pro: Limitless design opportunities.
  • Con: Cost.

Kitchen Cabinet Finishes

Kitchen cabinets come in many different finishes. Read more about their costs below.

Wood Veneer Cabinet Costs

Wood veneer can cost somewhere between $2,000 to $15,000. They are wood strips applied to particleboard or plywood. They provide the same look and feel of wood devoid of the larger price tag.

Stainless Steel Kitchen Cabinets Costs

Stainless steel cabinets run from $25,000 to $38,000. Since the price tag and aesthetics, it’s a less often used material than wood, laminates or veneers. Nevertheless, a lot of homeowners are choosing stainless because of its resilience, appearance and exceedingly long lifespan.

Laminate Kitchen Cabinets Costs

Laminates are priced at $4,000 to $15,000. Comparable to wood veneers, it’s a budget-friendly option to wood. It is a man-made material that is placed on particleboard in both high pressure and low pressure method.

Acrylic Kitchen Cabinets Costs

Acrylics are priced at $5,000 to $20,000 or more depending on the base material used. Acrylic is a very durable, high-gloss finish applied comparable to varnish. It comes in different colors usually on flat panels for a state-of-the-art appearance. Cost differences are because of the primary material used that can be anything from wood to MDF to wood to metal.

Kitchen Cabinetry Estimates by Design

The price of framed and frameless differ based on the wood, assembly and size of the project. The most critical decision when considering design is it it will fit the existing home furnishings.

Framed Kitchen Cabinets Cost

Framed kitchen cabinets cost $5,000 to $20,000+. Framed construction means that the rails and stiles are visible at the front and creates a flat frame that the cabinet door is affixed to. They are perfect for homeowners wanting a more traditional kitchen cabinet design.

Frameless Kitchen Cabinets Cost

Frameless kitchen cabinets cost $6,000 to $30,000+. Custom designs can induce higher end prices as ranges are nearly always due to the material quality, degree of customization and how big your kitchen is. They’re used in trendy and current designs. Frameless construction depends on a heavier box to conceal the frame and hang the cabinet doors.

Inset Kitchen Cabinets Cost

Inset, or flush mount, cabinets have the same range as most other semi custom and custom cabinets, $150 to $1,200 per linear foot. Expect to pay about 20 percent more for flush mounts than a comparable traditional design with the same level of materials. This kind has a unique design where the doors and drawers, when they’re closed, are flush with face frame opening.

Cost of Shaker Kitchen Cabinets

Shaker kitchen cabinets are priced the same as the other styles or around $100 and $1,200 per linear foot. These are style choice for the door and drawer faces, not a material variance.

Cost of Kitchen Cabinets by Size

10’ x 10’ Kitchen Cabinets Cost

At one time the standard, the 10’ x 10’ kitchen cabinet runs $2,000 to $24,000 dependent on the kind and materials you decide on. This size is 20 linear feet although the average size has expanded nearer to 25 linear feet.

12’ x 12’ Kitchen Cabinets Cost

Cabinets for a standard 12’ by 12’ kitchen cabinet costs $2,500 to $29,000. This size is around the average kitchen size in most US homes. The size of kitchens has doubled since the 20’s to adjust to open concepts, increases in storage requirements and larger and more popular appliances.

Cupboards for Small Kitchens

Homeowners end up spending around $1,700 to $20,000 on just the cupboards for a smaller kitchen. A small kitchen is usually 70 square feet or less. Homeowners don’t have to give up style or productivity in an old house with a small kitchen.

Accidents happen and if you’ve got a broken drawer in your kitchen you’ll want to fix it so you don’t have items falling out of your drawers.  Parts of homes wear out and the drawers in our kitchens are no different. When they break it can be frustrating to lose the storage space and an eyesore having an open gap.

Some “quick-and-dirty” handymen will do things like nail or glue the drawer front back in place and just forget there ever was a drawer, perhaps to make a tee time or get back to watching TV. Learning how to replace kitchen drawers need not be a painful project, let us show you how here.

Kitchen Drawer Replacement Steps

Use this step by step guide to learn how to replace kitchen drawers and where to buy replacement drawer boxes:

1. Measure The Replacement

To get started you will need to know the size of the replacement you need. Get the height, width, and depth of the opening for the replacement drawer.  Take off an inch for your height and width measurements and at minimum of a half inch from the depth which will allow for easy fitting and drawer slides.

2. Build or Buy a Replacement Drawer Box

Drawer boxes are typically custom built for each kitchen so heading down to the local Walmart to pick up a replacement isn’t an option. To get a replacement that will work you will either need to build a replacement, have a friend do it, or order a drawer box from a professional.

Custom made cheap replacement cabinet drawers can be made in your choice of material, using either dovetail joints or dowel joints, in exactly the size you need.  A replacement drawer box measuring 18” wide by 20” deep by 4” high costs less than $30 dollars from Drawer Connection.

DIY Kitchen Drawer Replacement

Step 1. – Remove the broken drawer out of the cabinetry and put it on a table.  Take the drawer front off by removing the screws that hold it in place.

Step 2. – Flip the drawer over and remove the metal runners from the sides of the drawer.  If the bottom of the drawer falls out, just set it aside.

Step 3. – Tap on all the sides of the drawer to separate it into the 5 sections that make up a drawer, the 2 sides, front, back, and bottom.

Step 4. – Measure the sections of your drawer and use your table saw to rip new replacement sections.  You’ll need to match the lengths and widths of all the the sections.  The front, back, sides, and bottom need to be exact so the runners can be replaced and the drawer will fit correctly.

Step 5. – Using a 1/4 inch dado blade for your table saw prepare your table saw by setting the bland and fence to 1/4 inch.  Run the front, back, and sides through the saw to create a channel in each of the pieces.

Step 6. – Set all four of your sections together, as if they were already put together.  The side pieces should sit on the sides of the front and back sections.  The channel from step 5 should all sit at the bottom of the drawer at the same height.  Measure the inside of the width and length of the drawer and add 1/2 inch to each measurement.  Cut a section of 1/4 plywood to those measurements to be the bottom of your drawer.

Step 7. – Get some wood glue and run a bead where the drawer bottom will sit.  Set the bottom into the channel made for it ensuring there’s a nice coating of wood glue.  Use clamps to hold all of the sections together until the glue dries.  It’s a good idea to wipe off any excess glue at this stage.

Step 8. – Drill holes for the drawer front screws to go through that are 3/16ths thick.  Using screws that are 1 1/4″ attach the front back to the drawer box.  Reattach the metal runners on the drawer and screw them into lace using 3/4 screws.  Set your DIY drawer into place back in the cabinetry and you’re done.d

3. Buying Drawer Slides To Match

The next step is making sure you have drawer slides that match your drawer box depth. You can choose from inexpensive roller slides to ball bearing slides that have soft close and smooth opening features. Most homeowners prefer buying the bottom-mount style drawer slides as they have a piece which wraps around the lower edges of the drawer box and makes for easier installation. There are cases where old hardware from the slides is still intact and can be reused, but many homeowners prefer starting fresh when repairing their cabinet drawers.

4. Prepping The Work Area

Depending on why the drawer broke, and how quick and dirty the repairs where you might have very little work, or a lot of work to do here. If there is any broken wood or hardware it should be removed and replaced. This can mean any glue that was used as a band-aid to hold the drawer front on the face of the cabinets, or it can mean removing and replacing broken or splintered wood inside your cabinets to have a solid area to secure your new drawer.  For glues you can try heating the adhesive up with a blow dryer or you can simply use a scraper to work the glue off and then sand & repaint the area.

5. Installing The New Drawer Box

Once your drawer box arrives, you will want to wait to attach the drawer front until the drawer box is installed and sliding back and forth correctly.  It can be a bit tricky to align the drawer front right, using double-sided tape to tack the pieces together saves time and effort. When installing the drawer ensure that the gaps on the top, bottom, and sides are equal. Once you are sure the box is installed right you can use at least 2 screws to secure the drawer front to the drawer box, from the inside of the drawer.

Buy Replacement Kitchen Drawers @ Drawer Connection

Buy cheap replacement kitchen drawers at Drawer Connection.  You can also shop for replacement dovetail drawer boxes and dowel drawer boxes on Drawer Connection’s site.

Avoid These Kitchen Trends

When you’re remodeling your kitchen you want to make good decisions.  There are kitchen trends to avoid and there are trends to follow.  This post will explore some of the most popular kitchen trends of 2021.  By knowing which trends to choose you can avoid the trends that will look outdated much faster.  A lot has changed in the past three decades, and how we treat our kitchens is one of those trends that has shifted considerably as contemporary living has evolved. Not very long ago, the sign of a good home was a tidy dining area with a kitchen at the back, out of view, only to be visited to cook and clean and that too by members of the household, never by guests. A good kitchen in a good home was invisible to guests, the opposite of what we consider to be contemporary urban living today. Kitchens today have evolved into a much central component in homes, bringing families together at the beginning and end of the day, it’s where you entertain your close friends and relatives, where you bond with a special someone over a jointly prepared meal, it’s the heart and soul of the modern home.

2021 Kitchen Trends

With such a central status comes a lot of scrutiny, kitchens have to be pristine, they have to reflect the character of the home they’re in and its residents, and this makes kitchen remodels an important and daunting task. Social and technological advances have revolutionized kitchens, making them the center of what the rest of the house is built around; simplistic but clean designs have become a favorite among homeowners with focus on inclusion and a lot of natural light.

With recommendations from interior designers and kitchen planning experts, we compiled a list of the most popular kitchen layouts and designs today.

Smart Kitchens

Technology has penetrated all parts of our lives turning itself into a necessity rather than a luxury that it once was. It doesn’t just come in the form of cool gadgets and appliances anymore, but has been integrated into everything, from heating and lighting to faucets and fridges, it has changed the way we carry out daily tasks and do things. A kitchen with technology integrated into all of its core functions is what a smart kitchen is.

A fairly recent addition to modern kitchens, with technology evolving every day, smart kitchens are becoming increasingly popular among homeowners. True smart kitchens are built around technology at their core while older kitchens can also be turned into smart kitchens to an extent, by adding smart hubs, gadgets, and sensors that automate basic tasks, or make them controllable through a smart phone and through voice commands.

Smart faucets equipped with motion-detection have gained a lot of popularity and can now be seen in a number of homes and commercial establishments. These faucets sense the presence of hands or objects under the sensor and turn themselves on and off accordingly; others can be turned on by the wave of a hand or a slight touch of the finger.

Smart refrigerators come with built-in touchscreen panels and operating systems that connect to the rest of your gadgets making it easy for you to compile grocery lists and sync them to your phone, and even let you order groceries right from the screen on the refrigerator. You can also by smart coffeemakers you can control from your phone or schedule the coffee brewing tasks, so the coffee is ready for you when you wake up.

Smart lighting has been around for some time, with motion detection and light detection technology the newest addition to smart lighting is the ability to control them through your phone, tablet, or smart watch, or through a voice activated smart-hub like Alexa.

As new technological advances are made every day and more technology becomes available to consumers, smart kitchens are a novelty that everyone wants to try and be the first to have, so it isn’t very surprising why they are among the most popular trends today.

Cabinet Colors

Timeless White | Elegant Gray | New & Bold Dark Colors

White kitchen cabinets have been preferred for many decades because of their clean look, especially in apartments and smaller kitchen where things tend to get chaotic, white brings a sense of order and tidiness. White is also a timeless color that goes with everything and almost all styles of kitchens, which only adds to its extensive appeal, making it a reigning favorite among homeowners, even today. The beauty of white is that it compliments other colors, which in a kitchen designed around a primarily white layout with hints of darker colors makes for a refreshing centerpiece to adorn almost all kinds of homes.

Following white cabinets as another favorite for many years are gray cabinets. Many home owners prefer gray for its flexibility and ability to fit in seamlessly with any design.

With white and gray colors dominating the market, a trend that isn’t expected to change in the near future due to their neat look and ability to go with everything, there’s another style of colors creeping into the hearts and homes of homeowners. Dark colors with matte or jewel-toned glossy finishes, especially navy, black, dark-wood, and emerald green have gained rapid popularity because of their luxurious look and indulgent feel doing a great job of enhancing living spaces. They’re bold, they stand out, and impart a strong character to any home.

The elegant and opulent ambience dark colored cabinets create, especially when finished with rich gloss, can’t be expected from other regular cabinets. However, such colors can be very overpowering, and need to be planned out such that the aura of the living space doesn’t shift from bold to aggressive, or dreary.

A fairly new trend in kitchen cabinet colors, darker palates don’t seem to be replacing the timeless white and gray any time soon, but they are certainly becoming more and more popular with time, becoming a defining characteristic of most modern urban homes.

Clean, Streamlined Designs (simplistic; not boring)

A lot of homeowners stick to their preference of farmhouse style and mid-century modern kitchens, and they can be seen in a number of homes, but preference is also shifting in favor of streamlined kitchens. Streamlined kitchens are gaining popularity due to their simplistic design, flowing layout, and a clutter free aesthetic where the other two styles may feel overpowering and crowded at times, especially in smaller kitchens.

A characteristic feature of most streamlined kitchens is the absence of upper-wall cabinets, which most now consider to be an inefficient use of space as a majority of people couldn’t reach the upper shelves anyway. Removing these makes the kitchen look more spacious and allows for a more productive use of countertops. A spacious kitchen makes for a more stress-free environment which is what anyone wants in a home after a long day’s work, and streamlined kitchens work towards that.

Streamlined is simplistic, but that doesn’t mean it’s boring. On the contrary, streamlined kitchens are the latest in contemporary design that allow for more efficient use of kitchen space, as well as a flowing, clutter-free environment. When modeling a streamlined kitchen, you can opt for textured materials to give the design a distinct character. A lot of people prefer using stone tiles on the floor and sculpted tiles to create intricate and eye-catching backsplash designs that make for a great focal point. This will set your kitchen apart from the very common floor tiling in backsplash or natural stone tiles which are beveled, stacked, or sculpted to create the best focal point possible. Some homeowners also go for ceiling design to impart that added dash of character to their kitchens.

Quartz Countertops are Never Getting Old

We might not even be exaggerating with our above heading, as quartz remains the first choice of homeowners for countertops in high-end kitchens. Quartz’s primary rival in the high-end countertop market, granite, requires a bit more in way of maintenance.

Quartz took its time in gaining popularity and favor when it entered the countertop market, because of the limited range of colors and patterns that it had on offer. This of course changed over time as technology developed, enabling manufacturers to create an array of designs, finishes and realistic stone patterns. Today, you can get quartz to mimic all kinds of natural stones and showcase all kinds of unique patterns, making it a popular choice among those looking to infuse an extra bit of character in their kitchens.

If you’re not a fan of natural stone patterns or if they won’t fit in with the rest of your house, there’s an endless variety of soft neutral colors like cream, white, or grey that you can go for. In fact, softer colored patterns are what a lot of homeowners are now choosing over other designs as they provide for a tidier more relaxing look and feel.

Recent years have also seen a rise in the trend of composite sinks, that are basically sinks made out of the same material as the countertop, and they are beautiful. They imbue the kitchen design with a seamlessness that is otherwise impossible to achieve especially with stainless steel sinks, which are still a popular choice among homeowners.

Cabinetry & Kitchen Storage

Efficient storage is what every kitchen needs but unfortunately, efficient is what most conventional and even contemporary cabinetry isn’t. If your kitchen has upper wall cabinets there are always going to be certain shelves that you need a stool to reach, making them virtually useless for day-to-day use. Even if your kitchen doesn’t have wall cabinetry, there will still be a lot of wasted space in drawers and shelves because of the way they’re designed. Quite often, the space that is available is either too small to store bigger things, or too wide to keep everything effectively organized.

A kitchen is only as functional as its storage space. A disorganized kitchen with ineffective storage will leave you frustrated at the end of cooking sessions, which is the last thing you need after an already long day. A lot of homeowners now counter this issue by opting for more effective organization techniques to use their cabinetry to it’s fullest potential. This includes the use of organizers like cutlery and other utensil dividers in drawers, appliance garages, spice racks, cooking pot caddies and waste cabinets for clean, out-of-the-way garbage disposal. The use of these and other storage organizers allows for a more fluid and hassle-free cooking experience.

Appliance Styles

When designing a state-of-the-art kitchen, you don’t only have to look at what the appliance doesn’t and how efficiently it does it, but also how the appliance looks. Aesthetics are important and if your appliances look out of place and don’t fit in with the overall design of the kitchen, everything looks like a haphazard mess. Where stainless steel appliances were a strong preference for some time, appliances with a grey or silver metal finish are now becoming more popular because of their neutral but trendy look. All-white appliances also dominated the market for a long time and continue to do so, but homeowners are becoming more willing to experiment with braver, bolder colors like red and blue to spice up their kitchens.

Preferences are also shifting from commercial ranges with more homeowners now going for the pricier but more sleek-looking induction cooktops and wall ovens. Granted this shift is more space-consuming but if you space to spare, the contemporary looks it imbues in any kitchen more than makes up for the shortfall. Homeowners will smaller kitchens, however, still prefer the sturdy commercial ranges which have proven the worth of their metal for many decades.

In recent years, homeowners have also been seen leaving conventional ovens in favor of the more effective steam ovens, that work quicker, and also preserve the taste, moisture, and nutrients of foods to a greater degree than their counterparts. For kitchens with limited isle space, French-door wall ovens are also becoming a popular.

Hardwood & Ceramic Tile Flooring

Hardwood floors have been the signature of class and opulence for many, many years because of their strong character and luxurious feel. This hasn’t changed, but recent years have seen a strong competitor rise in the kitchen flooring market, and that is the ceramic tile. This newfound popularity ceramic tile enjoys it owes to technological developments that have paved way for an infinite number of styles, patterns and sizes ceramic tiles can now be manufactured in.

Ceramic tiles require less maintenance than hardwood floors but didn’t gain popularity because of the limited variety they were available in. Now that they can be purchased in virtually any pattern, in that of hardwood, they are becoming a popular alternative for homeowners that can’t be bothered with the extensive maintenance hardwood floors require. Technology has also made it possible for ceramic tiles to mimic other materials like natural stone not only in style but also in texture, and to be manufactured in any size and shape, like wide planks, to mimic hardwood planks, all of which adds to their appeal. They are cheaper than natural wood and stone, and can be made to look and feel like wood and stone, so it isn’t surprising why homeowners on a budget would go for ceramic tiles over other more expensive flooring.

Kitchen Islands Today Are More Than They Were Yesterday

The past several years has seen kitchen islands grow from being afterthoughts to being the focal points in most kitchens. With streamlined kitchens gaining popularity, kitchen islands have become more multi-purpose than before, now offering under-counter storage space, and appliance cutouts while also doubling as a casual bar or dining area to bring the family together. They are now a popular feature in open-plan kitchens, separating the kitchen and living room space, sometimes extending into the latter so the kitchen remains a clutter free space.

Kitchens Can Be Pet-Friendly

We’ve always been warned to keep babies and pets a safe distance away from kitchens and although it is possible to babyproof and ‘pet-proof’ kitchen spaces to a great extent, not much have been done in way of making kitchens pet-friendly until recently.

Kitchens can now be designed to include feeding stations, which is essentially a lower cabinet space reserved for this purpose at a corner of the kitchen. Even kitchen island can be designed to accommodate pet areas with a bed, toys, and other pet-related essentials.

Buy Replacement Kitchen Drawers @ Drawer Connection

Buy cheap replacement kitchen drawers at Drawer Connection.  You can also shop for replacement dovetail drawer boxes and dowel drawer boxes on Drawer Connection’s site.

Kitchen Remodeling Tips

The new year is a great time to start thinking of about Kitchen Remodeling. Read on to learn more!

Kitchen Remodeling Tips

When remodeling a kitchen, you should consider that things can go wrong and not as planned. Here are a couple of tips to avoid getting burned remodeling your kitchen. A kitchen remodel is kind of a big deal—not something to be addressed hastily. Before you visit a showroom or meet with a contractor, read some kitchen remodeling tips and advice for creating the cooking space you’ve always wanted.

Stay Within Your Budget

Before you start to plan, think about the market, and consider if a low-, medium-, or high-end kitchen remodel makes sense. Costs can run the range from $1,500 for a typical paint and hardware upgrades to $50,000 if you’re going to install expensive countertops and high-end appliances. Understanding your neighborhood will help keep from overspending – you might not get your investment back installing granite in your tiny starter home – or even worse, underspending. You’ll never see Formica in high-end homes, and in fact, it may hinder to your sale.

Stay Away From An Identity Crisis

Don’t attempt to remodel a 50’s ranch-style kitchen into a modern cooking space.  All homes, however unassuming, are built in certain architectural styles. Work with your remodel it, not against it. You’ll end up spending too much money and time on a complete overhaul, and you’ll end up with a kitchen that looks like it belongs in a different home.

Don’t Lose Track Of Trends

There’s constantly something new coming out in the world of kitchen improvements. By staying on top of the newest technological trends and developments, you may be able to find less expensive, more environmental-friendly versions of today’s hottest looks.

Keep Your Plumbing Where It Is

Moving your gas and water lines to accommodate the new configuration of sinks, stoves, ovens, or dishwashers is very costly, especially in older homes. Keep extra cash in your pocket by leaving any pipe-connected elements where they are.

Keep An Eye Out For The Wrong Floor Plan

If your budget allows you to rearrange appliances, be sure to keep your floor plan into consideration. Does it follow the triangular pattern between the refrigerator, stove, and oven? Is your dishwasher next to the sink? If not, you are going to create a mess every time you walk across the kitchen with a dripping dish in your hands

Don’t Trash Your Old Cabinets

If they’re quality wood and still in good shape, you’re in luck. This is one of the first things to check when considering a pre-remodel kitchen because cabinet frames are the most expensive part of the entire kitchen.  It’s quite simple to give restorable cabinets a makeover. There are 3 common ways to repurpose and save money; adding new doors and hardware, re-laminating sides and the front of the cabinets, or repainting. Make sure all the cabinets are cleaned and lightly sanded, then have a professional painter come in to spray them.

Don’t Skimp On New Hardware

Home remodeling stores carry a large selection of door hardware.  Pick knobs and pulls that complement the architectural style. These are an added touch that makes the whole room pop! Remove and replace any old painted hinges with brand new ones. It may be time-consuming but is also very inexpensive.

Benefit From Free Advice

Look at the home improvement centers for free, computer-based design services for help designing your kitchen. These professionals are at the leading edge of today’s remodeling trends, and their services include one-on-one assistance as well as at-home consultations, complete project supervision, and installation services.

Don’t Mismatch Your Appliances

Home remodeling stores carry a large selection of door hardware.  Pick knobs and pulls that complement the architectural style. These are an added touch that makes the whole room pop! Remove and replace any old painted hinges with brand new ones. It may be time consuming but is also very inexpensive.

Get the best attainable faucet, one with a pull-out spray or a gooseneck with removable head. It’s a necessity– and the difference between good and awesome is only $50 -$75. Stick to one consistent fixture finish because mixed finishes can look like mish-mosh.

Don’t Forget Include Sinks And Fixtures In Your Budget

When buying new appliances, stick with the same brand. Fortunately, appliance designers have begun to create good-looking, budget friendly lines that match. With a little homework and some smart shopping, you can find inexpensive appliances that look very high-end – and when they match, you get a designer look for a lot less.

Buy Replacement Kitchen Drawers @ Drawer Connection

Buy cheap replacement kitchen drawers at Drawer Connection.  You can also shop for replacement dovetail drawer boxes and dowel drawer boxes on Drawer Connection’s site.

Cabinet Drawer Measuring

Measuring for cabinet drawers is simple. read on to learn more!

After you’ve consulted the installation instructions for the hardware you plan to use, the first consideration is drawer overlay, which refers to how much your drawer fronts should overlap the cabinet end panels or face frames. If they shouldn’t overlap at all, you want inset fronts. You need to know whether you have overlay or inset drawer fronts to calculate your drawer depth. Inset fronts generally require slightly shallower drawer boxes.

The second thing you need to think about before ordering drawers is the hardware you plan to use. Drawer hardware comes in two basic types:

  1. Side-mount slides attach to the sides of your drawer boxes. You’ll be able to see these slides when the drawer boxes are open. You can get side-mount slides in ¾ or full extension, which refers to how far the drawer boxes pull out of the cabinets. Most side-mount slides require 1/2” to 17/32” of clearance on each side of a drawer. That means each drawer should be 1” to 1-1/16” smaller than the opening to fit properly.
  2. Under-mount slides attach to the bottoms of drawer boxes and can’t be seen when the drawers are open. They’re quite a bit more expensive than most side-mount slides and usually have lots of side-to-side and up-and-down adjustments. Under-mount slides require 3/32” – 5/32” of clearance of each side of your drawers to work correctly. Your drawers should be 3/16” – 5/16” narrower than their openings.

Let’s assume you want to order a drawer box for a face frame cabinet with a 6” tall, 18” wide opening. Your cabinet is 24” deep. You’ll have a half-overlay front that measures 7” x 19”. The size of the drawer front really doesn’t matter, but it’s here to help you understand what half-overlay means.

Because a 24” deep cabinet will have an interior depth that’s slightly less than that dimension, your drawer slides need to be smaller, too. KV’s installation instructions show that the next size down from 24” is 22”, so that’s your slide length and drawer depth.

Allow at least 1/4” of clearance above and below the drawer, giving you a height of 5-1/2” (6” minus 1/4” at top and 1/4” at bottom). Your drawer box should be 17” wide, 5-1/2” tall and 22” deep.

The main thing you should take away from this article is that the only fool-proof way to measure drawer boxes correctly is to consult the specs or installation instructions for the hardware you plan to use. With that disclaimer out of the way, here’s a cheat sheet to drawer boxes and hardware:

  • Drawer boxes for side-mount slides should be 1” – 1-1/16” narrower than the opening. The larger dimension will give you a little room to adjust the slides if necessary.
  • Drawer boxes for under-mount slides need to be 3/16” – 5/16” narrower than the opening, depending on the thickness of the drawer material. Sorry, but you’ll have to consult the specs for details. Take a look at Blum under-mount slides.
  • If you’re going to use under-mount slides, you’ll want to have notches put in the backs to accommodate the hardware.

Source: https://www.cabinetnow.com/how-to/measuring-for-cabinet-drawers/

 Buy Replacement Kitchen Drawers @ Drawer Connection

Buy cheap replacement kitchen drawers at Drawer Connection.  You can also shop for replacement dovetail drawer boxes and dowel drawer boxes on Drawer Connection’s site.

Kitchen Cabinet Reorganization

Kitchen cabinet organization is one of the major focuses in today’s kitchen design and remodeling world.  Having enough space that’s laid out intelligently makes the kitchen more user friendly. Better organization in the kitchen means it will be faster and easier to cook and even clean up.  See all of the great kitchen cabinet organization products and solutions below.

Pot & Pan Organization

Most homes have various sizes of pots and pans.  They typically get stacked inside each other to save space.  This might be a space saver but means you’ve got to dig out the pan or pot you need every time you cook.  Pot and pan organizers rack your pots and pans on their sides and stand them up much the same way a dishwasher does.  This makes better use of the cabinet space and solves the problem of having to lift up 3 or 4 pans to get the one you need.

Spice Organization

Most homes have a wide variety of favorite meals that require a wide variety of spices.  From Turmeric to Tandoori and Vanilla to Thyme you need to be able to find what you need easily and quickly as you cook.  There are a number of great spice organization options.  You can include door mounted tray systems, have a spice tray drawer organizer, or even pull-out spice storage.

Trash Can Pull Out Storage

Most homes are trying to maximize the storage space in the kitchen.  Closets with a garbage can are a wasteful use of space.  Many homeowners prefer to have cabinet trash compactors or pull out trash areas.  This makes it easily accessible yet out of sight.  These solutions also help keep potential garbage smells out of your kitchen.

Kitchen Cabinet Corner Storage

Kitchen cabinet design has always been tricky in the corner of the kitchen.  To solve this problem people use lazy susans, corner drawers, and pull out corners.  All of these solutions focus on making it possible to use the corner space in your kitchen, but still have the items stored easily accessible.

Kitchen Cabinet Appliance Storage

Serious foodies and home chefs typically aren’t satisfied with a toaster and microwave.  They have KitchenAid mixers, Nu-wave grills, and Crockpots.  There typically isn’t space to just leave these appliances out and they can be cumbersome to store.  A metal basket pull out organizer is the perfect solution to where and how to store your kitchen appliances.  This will leave your counter space clear and ready for use.

Under Sink Kitchen Cabinet Organizers

Another spot in the kitchen that frequently gets chaotic and needs some organization is under the sink.  Your dish soap, dishwasher tabs, sponges, brushes, and cleaning supplies are many times simply a mess under the sink.  A cleaning supply caddy with a pullout and handle make it easy to get what you need out or take all of it out for a deep kitchen cleaning.

Kitchen Cabinet Organization & Design

MK Remodeling offers kitchen remodeling services in Phoenix that include detailed kitchen cabinet organization solutions in our designs.  Our team thoughtfully considers your kitchen cabinet needs and creates well laid out cabinet organization solutions that will make it easier and more fun to use your kitchen.  As more and more families are spending time in the kitchen the better organized it is the more you’ll use it and save money over going out for meals.

 Buy Replacement Kitchen Drawers @ Drawer Connection

Buy cheap replacement kitchen drawers at Drawer Connection.  You can also shop for replacement dovetail drawer boxes and dowel drawer boxes on Drawer Connection’s site.

Kitchen Cabinet Replacement Vs. Refacing

Kitchen Cabinet Replacement

  • Existing cabinets are first removed and expert installation specialists level your base cabinets to prevent them from cracking in future years. Wall cabinets are hung and hardware and doors are professionally installed.
  • There are thousands of companies who will replace your cabinets but is an expert job and you want to find a company with a great deal of experience, excellent reviews and a company that guarantees the quality of their work.
  • The average cost for cabinet replacement is $16,000 with prices ranging from $12,000 to $20,000 for the US in 2020.
  • There is nearly always a good time to replace kitchens. When constructing a new house, remodeling your kitchen, building a new addition, creating a kitchen layout, when cabinet boxes are in poor condition, among others.
  • Although it is not the most eco-friendly option, (old material frequently gets landfilled) it is possible to donate good condition cabinets to Habitat for Humanity and recycling yards.

Kitchen Cabinet Refacing or Refinishing

  • There are two elements to cabinet refacing. Obviously, the installation is new drawer doors and faces and the installation of brand new cabinet fixtures. If needed they may be able to replace entire drawer sets.
  • Not as many professionals offer this service compared to cabinet replacements but it is catching on as more homeowners learn about refacing options. It should not be difficult to find an experienced professional in your area who can do a professional job of cabinet refacing.
  • The average cost for cabinet refacing is $8,500 with prices ranging from $7,000 to $10,000 for the US in 2019.
  • Refacing cabinets is a great idea when the cabinet boxes are still in good condition, when the total cost may be an issue, when you are remodeling a home and when you like the current layout of your kitchen.
  • It usually takes a professional around 2 to 4 days to complete the task.
  • Refacing is also very friendly to the environment. During the process, the only items heading to the trash are drawer fronts and cabinet doors.

Kitchen Cabinet Replacement or Refacing – What Is Right For You?

it is always great to have new cabinets, so if you can afford it and it works within your budget plan for your home, new kitchen cabinets will add to the resale value and look great. However, cabinet refacing is a very viable alternative if you do not want to make as large an investment up-front.

Buy Replacement Kitchen Drawers @ Drawer Connection

Buy cheap replacement kitchen drawers at Drawer Connection.  You can also shop for replacement dovetail drawer boxes and dowel drawer boxes on Drawer Connection’s site.