Author: craig braddick

Constructing A Drawer Box

Are you looking for information on “Constructing A Drawer Box” or how to “Build Your Own Drawers“? Well, we put together a pretty solid guide that should show you step by step how to build your own drawer box at home.

With many DIYer’s, the terms “drawer dados” or “drawer dovetails” is enough to end them running off. However, there are simpler ways to create a drawer without the use of a router or table saw, while still ending with a beautiful and sturdy product. Are you stressed over fasteners being visible? Our design hides them in a clever way so they are not visible, giving a sturdy appearance. Keep reading to learn how you can build a drawer of any size quickly, and simply.

Required Time: 1 hour 30 Minutes

Difficulty Level: Pocket hole joinery and square cuts make this project easy and comfortable for beginners.

Step-by-Step Instructions

Follow these step by step instructions for how to build a drawer box.  Tools will be required for some steps such as saws, drills, and other hand tools.

  1. Cutting parts

By using the cut list and a miter saw, cut the 1×3, 1×6 and square dowels to the correct size. Mark the cut lines on the plywood’s face with a framing square. Position painter’s tape on the cut lines, if necessary mark again. By using painter’s tape, it helps prevent splintering plywood when cutting. Using a circular saw, cut along the lines. Then, sand the cut edges lightly to remove any burrs from around all parts.

  1. Drilling Pocket Holes

Place from and back pieces of the 1×3 on your work surface. Then, with the use of a Kreg Jig drill out two pocket holes, one on either end of the boards.

  1. Drilling Drawer Face Holes

Position the 1×6 drawer ace on your work surface, pocket holes should face downwards. Then, use your tape measure with a pencil for making two marks located 4-inches from each end of your board, and center its width. You will create two pilot holes with a Drill/Driver, which are used later on for attaching your drawer face.

  1. Adding Cleats to Front and Back Pieces

On the 1×3 piece, you will position an 18-inch cleat on both the front and back to be flush with the ends and bottom edges. Then, you will apply wood glue to the cleat with a bead pattern. Once you reposition it, you will need to nail it using a pneumatic nail gun with ¾-inch finishing nails to keep it in place.

  1. Attaching Cleats on the 1×3 Side Pieces

Remaining cleats should be placed on the 16-inch sides to be centered on the length, while flush with bottom edges. Doing this should create a 1 1/8-inch inset on either end of the cleats. Mark each end of the cleats using a pencil. Cleats should be removed, bead of wood glue applied, and position them in place again. Cleats then get secured with a pneumatic nail gun using ¾-inch finishing nails.

  1. Dry fit Sides

You should set the 1×3 boards upright so cleats are running along the bottom edge. Then, the front and back pieces should have glue applied, positioning them between the sides to be flush with each end.

  1. Assembling Sides

As we are not using fancy tools in this guide, we will use a basic method to hold the square joints for the assembling process. Position a block in the corner, ensuring it is an exact square. Then, clamping it to each side, make sure it is tight. This assists in holding piece in the correct position when inserting and driving the 1 ¼-inch pocket screws into the pocket holes and adjoining each side. When each of the four corners have been assembled, check that the assembly is square, then recheck with a framing or speed square. Measure corner to corner.

  1. Inserting Plywood Base

Place a bead of wood glue on the upper edge of every cleat. Place the plywood on the inside of the frame, ensuring they are on the cleats.

Tip: After painting or staining drawers, running a small clear caulking bead along the edge of your plywood base can help with keeping dust from getting between the 1×3 boards and plywood. In addition, if you plan to place heavy objects in the drawer, you should consider using 1/2-inch plywood.

  1. Attaching Drawer Face

On the 1×6 face, center the front of your drawer. Based on the application used, you should let the drawer face hang under the drawer box. Then, mark the position the drawer is hanging on to the 1×6. Remove the drawer, applying wood glue in the marked space, reposition your drawer. With a Drill/Driver drive in the 1-inch wood screws using your pilot hole in the front drawer and backside of your 1×6 drawer face.

Tip: To achieve a perfect fit, it is best if you completely install the drawer box prior to positioning and attaching the drawer face.

Buy Drawer Boxes Online

If you don’t have the time, tools, or woodworking skills to build your own drawer boxes but need drawer box replacements for your kitchen or bathroom DC Drawers is happy to build the replacement for you.  Simply take measurements for how wide, high, and deep you need the new drawer box to be and we will fabricate your replacement drawer box and ship it to you.  If you have any questions about how to measure for your replacement or would like to place your order by phone please call 877-917-4887.

Plywood Drawers

Dimensional stability is one of the advantages of using plywood for any purpose; unlike solid wood, plywood does not expand or contract with variations in humidity. It is also available in huge sheets of varying thicknesses, removing the need to laminate parts together to form a piece of wood of the desired size and to resaw timber to obtain thinner pieces.

This makes plywood a good alternative for furniture construction, including the construction of drawers for cabinets, dressers, tables, etc. Due to the dimensional stability of plywood, the sides of the drawer will not expand in humid conditions. This expansion might cause the sides to bind in the drawer opening, making the drawer difficult to open. Using plywood for the bottom minimizes side-to-side movement, hence reducing binding of the drawer and its runners.

In addition to these significant benefits, plywood construction minimizes the total amount of labor required. When constructing six drawers for a dresser, this might be crucial and save considerable time.

Properly constructed, the only hardwood component required for the drawer is the face, as plywood will likely not match the wood used for the remainder of the piece of furniture, even if it is the same sort of wood. Finally, construction using plywood is substantially less expensive than with hardwood. Even when utilizing hardwood plywood, just the face veneer is made of hardwood, reducing the expense of using solid hardwood throughout.

Construction of Plywood Drawers

Regardless of style, drawers consist of five parts: the front, rear, bottom, and two sides. Typically, the front is made of solid wood and mirrors the overall aesthetic of the piece being constructed. Even with commercially produced furniture, the back, bottom, and two sides are frequently comprised of plywood.

In the instance of drawers when the drawer front overflows the furniture’s framework, there are technically six elements, however only two are connected as if they were one. These are the structural and decorative drawer fronts, respectively. If a decorative drawer front is utilized, the structural drawer front is likewise made of plywood. In cases when the drawer front is flush with the cabinet frame, the structural drawer front also acts as the ornamental drawer face.

In lieu of this structural drawer front, low-cost furniture may use angle brackets between the drawer sides and the decorative drawer front. A piece of wood placed in the corner can have the same result.

Case Sides

The size of a drawer is mostly dictated by the size of the drawer opening in the cabinet into which it will be installed. This is a pre-project decision. Determining the precise construction method and dimensions of your drawer is part of the design process.

The overall outside dimensions of drawers must always be smaller than the drawer opening, even if it is only 1/16″ smaller. You need a small amount of clearance all the way around to prevent the drawer from sticking. At the same time, you do not want too much room, since this could make it too easy for the drawer to get crooked in the opening and cause jamming.

Drawer runners or slides have a significant impact on drawer size. Single runners, which are mounted under the center of the drawer, will have the least impact because they are mounted under the frame and only protrude slightly into the recess at the bottom of the drawer. Pairs of side-mounted drawer slides can have a larger influence, as the most typical dimension is 1/2 inch. With 12″ thick drawer slides, the drawer must be 1 1/16″ to 1 1/8″ narrower than the aperture. This discrepancy must be factored into the overall size of the drawer as well as the sizes of its constituent components.

As noted previously, the other important design choice is whether the drawer front is flat with the cabinet frame or sits on top of the cabinet frame, overhanging the drawer opening. If it overlaps, it often overlaps between half an inch and three quarters of an inch on either side, albeit not always by the same amount.

Drawer backs and sides are typically not the entire height of the drawer opening, although the structural drawer front will be, minus around 1/16″. Rather, these components are reduced by half an inch to three quarters of an inch to prevent them from interfering with the drawer opening. This is a matter of personal preference, with some preferring shorter sides and backs to avoid binding and others wanting to make them as tall as possible without binding in order to put more in the drawer.

When there are both structural and ornamental drawer fronts, it is usual for the drawer sides to run full depth, overlapping the ends of the structural drawer front and the drawer back. When the ornamental drawer front is also the structural drawer front, the drawer front will overlap the drawer sides to conceal the end grain. On higher-quality furniture, the drawer is assembled using half dovetails.

Some low-cost furniture employs MDF or particle board instead of plywood for drawer construction. MDF is not as robust as plywood and is more difficult to connect together, but it is suitable for most uses. MDF joints will not be as strong as laminated softwood or hardwood plywood joints, and it is extremely difficult to perform effective repairs if they break.

MDF and particleboard are additionally more absorbent. When they absorb water, the pieces swell, particularly at the edges, and their structural integrity is compromised. This can result in many issues, such as drawers sticking and falling apart.

Bottoms of Drawers

There are two fundamental methods for installing the drawer bottom. As it affects the size of the parts and how they are cut, determining how to mount the bottom is a crucial aspect of the drawer design process.

The easiest way to install a drawer bottom is to cut a rabbet in the bottom edge of all the drawer pieces to accommodate the plywood bottom. The drawer bottom is then hammered into place within this rabbet. This approach is less secure and leaves no room for the wood to expand.

Knowing the size of the drawer opening and accessible depth is the first step in determining the part’s dimensions. In other instances, shorter drawer slides are utilized, and the drawers do not extend to the entire depth of the cabinet. A great deal depends on the drawer slides chosen.

Putting Together the Drawer

There are numerous methods for attaching the drawer sides to the front and rear panels. Using a basic butt joint is the simplest way to connect the sides to the rear and front. However, this simplicity comes at a price; the joint is prone to separation and cannot withstand heavy use.

This can be enhanced by employing a rabbet joint instead of a butt joint. This junction includes cutting a rabbet in the sides of the front and back parts (equivalent to the thickness of the side pieces) and inserting the side pieces into this rabbet. The advantages of this joint include the opportunity to use mechanical fasteners to enhance the bond between the side pieces and the front/back parts. However, the glue will attempt to adhere to the end grain, which does not produce the strongest joints.

Driving a nail or small diameter dowel from the side pieces into the front/back pieces gives great strength to the junction without being evident from the exterior of the component.

 

 

Which Is Superior: Knobs or Pulls?

You’ve selected the cabinets and finishes for your kitchen or bathroom remodel. However, it is now time to choose between knobs and pulls. These seemingly insignificant bits of gear may transform the functioning and appearance of your room. Nonetheless, if you are stuck in the knobs vs. pulls discussion, consider the following points.

Consider Cabinet Appointment

When choosing between knobs and pulls, style is not the only factor to consider. Consider cabinet location next. In many cases, knobs make it easier to open top cabinet doors. Lower cabinet access is made simpler by pulls.

Observe this Victorian kitchen. All upper cabinets have knobs, whereas the majority of lower cabinets have pulls. This historic kitchen is yet another excellent example. The majority of the lower cabinets and drawers have pulls, while the upper cabinets have knobs.

Cabinet Versus Drawer Distinction

Both cabinets and drawers require knobs and pulls. As you peruse images of inspiration, you may notice a pattern. Cabinet doors frequently feature knobs. In contrast, drawers typically feature pulls.

For example, the knobs on the under-sink cupboards in this coastal casual bathroom were chosen by the designer. However, pulls were added to the drawers. The same holds true for this quirky kitchen, where mismatched pulls and knobs decorated the lower and top cabinets, respectively.

Click here to shop for dowel drawer boxes online

2022 Kitchen Remodeling Tips

The new year is a great time to start thinking of about Kitchen Remodeling. Read on to learn more!

Kitchen Remodeling Tips

When remodeling a kitchen, you should consider that things can go wrong and not as planned. Here are a couple of tips to avoid getting burned remodeling your kitchen. A kitchen remodel is kind of a big deal—not something to be addressed hastily. Before you visit a showroom or meet with a contractor, read some kitchen remodeling tips and advice for creating the cooking space you’ve always wanted.

Stay Within Your Budget

Before you start to plan, think about the market, and consider if a low-, medium-, or high-end kitchen remodel makes sense. Costs can run the range from $1,500 for a typical paint and hardware upgrades to $50,000 if you’re going to install expensive countertops and high-end appliances. Understanding your neighborhood will help keep from overspending – you might not get your investment back installing granite in your tiny starter home – or even worse, underspending. You’ll never see Formica in high-end homes, and in fact, it may hinder to your sale.

Stay Away From An Identity Crisis

Don’t attempt to remodel a 50’s ranch-style kitchen into a modern cooking space.  All homes, however unassuming, are built in certain architectural styles. Work with your remodel it, not against it. You’ll end up spending too much money and time on a complete overhaul, and you’ll end up with a kitchen that looks like it belongs in a different home.

Don’t Lose Track Of Trends

There’s constantly something new coming out in the world of kitchen improvements. By staying on top of the newest technological trends and developments, you may be able to find less expensive, more environmental-friendly versions of today’s hottest looks.

Keep Your Plumbing Where It Is

Moving your gas and water lines to accommodate the new configuration of sinks, stoves, ovens, or dishwashers is very costly, especially in older homes. Keep extra cash in your pocket by leaving any pipe-connected elements where they are.

Keep An Eye Out For The Wrong Floor Plan

If your budget allows you to rearrange appliances, be sure to keep your floor plan into consideration. Does it follow the triangular pattern between the refrigerator, stove, and oven? Is your dishwasher next to the sink? If not, you are going to create a mess every time you walk across the kitchen with a dripping dish in your hands

Don’t Trash Your Old Cabinets

If they’re quality wood and still in good shape, you’re in luck. This is one of the first things to check when considering a pre-remodel kitchen because cabinet frames are the most expensive part of the entire kitchen.  It’s quite simple to give restorable cabinets a makeover. There are 3 common ways to repurpose and save money; adding new doors and hardware, re-laminating sides and the front of the cabinets, or repainting. Make sure all the cabinets are cleaned and lightly sanded, then have a professional painter come in to spray them.

Don’t Skimp On New Hardware

Home remodeling stores carry a large selection of door hardware.  Pick knobs and pulls that complement the architectural style. These are an added touch that makes the whole room pop! Remove and replace any old painted hinges with brand new ones. It may be time-consuming but is also very inexpensive.

Benefit From Free Advice

Look at the home improvement centers for free, computer-based design services for help designing your kitchen. These professionals are at the leading edge of today’s remodeling trends, and their services include one-on-one assistance as well as at-home consultations, complete project supervision, and installation services.

Don’t Mismatch Your Appliances

Home remodeling stores carry a large selection of door hardware.  Pick knobs and pulls that complement the architectural style. These are an added touch that makes the whole room pop! Remove and replace any old painted hinges with brand new ones. It may be time consuming but is also very inexpensive.

Get the best attainable faucet, one with a pull-out spray or a gooseneck with removable head. It’s a necessity– and the difference between good and awesome is only $50 -$75. Stick to one consistent fixture finish because mixed finishes can look like mish-mosh.

Don’t Forget Include Sinks And Fixtures In Your Budget

When buying new appliances, stick with the same brand. Fortunately, appliance designers have begun to create good-looking, budget friendly lines that match. With a little homework and some smart shopping, you can find inexpensive appliances that look very high-end – and when they match, you get a designer look for a lot less.

Buy Replacement Kitchen Drawers @ Drawer Connection

Buy cheap replacement kitchen drawers at Drawer Connection.  You can also shop for replacement dovetail drawer boxes and dowel drawer boxes on Drawer Connection’s site.

Exploring Sliding Dovetail Joints

Sliding Dovetail Joints

What Is A Dovetail Joint?

The dovetail joint is a way to connect two pieces of wood. It is considered one of the most durable methods and it is visually attractive. It is done by creating a channel in one piece of wood that is wider at the bottom and more narrow at the top. Then the other section of wood has the edge of the board tapered to match the channel. To assemble the two sections craftsmen slide the tab into the channel and then use a rubber hammer to tap the tab board into the channel board.

Best Uses

There is a wide range of products that are built using the sliding dovetail joint. Because of its strength it is used in shelving, cabinet bottoms, table frames, cabinet sides, wooden musical instruments, and especially in quality drawer boxes. From weekend warrior home projects to mass produced wood furniture the sliding dovetail joint is one of the strongest and most attractive types of wood joinery that you can find. It takes the skill and patience of master woodworkers and the right tools to make this type of joint that provides the best durability possible.

Advantages Of Dovetail Joints

Large Surface Area – The sliding dovetail joint provides 3 surfaces for glue to be used in joining the sections of wood. This means that in addition to a snug fit and already being the strongest joint available the increased glue helps lock the sections of wood tighter.

Looks Attractive – With other types of joints you will see hardware on the outside of the piece. Whether it be metal anchors, screws, staples, or other hardware there will be a disruption on the surface of the wood. The sliding dovetail joint is a beautiful woodworking technique as it does not show visible evidence of how the wood was joined together.

Interlocking – Dowel joints and staples rely on the tension and adhesive strength of small areas inside the sections of wood to provide strength. Even with perfect machining these types of joints do not physically interlock like the sliding dovetail joint. Sliding dovetail joints have the ability when machined by talented craftsmen to hold together without ever needing glue.

Durable Joint – Because of the interlocking nature and glue these are the longest lasting and most durable type of wood joinery. Quality wood working projects that are made with pride are made to last lifetimes.

Expert woodworkers are required to make full use of these advantages. Measuring out and cutting the tab and channels used to make sliding dovetail joints are fairly difficult and take patience. If these are not made by passionate craftsmen the advantages listed above will not be as present in the piece. Any type of dovetail joint is more costly than staples or other types of hardware, but it last much longer and look a lot better.

Quality Sliding Dovetail Joints

The woodworkers at Drawer Connection have the training, skill, and patience to make the perfect sliding dovetail joints for your drawer box needs. If you are a homeowner or cabinet maker our company can build the best built, longest lasting, and affordable drawer boxes for your bathroom and kitchen cabinetry.

Stay tuned for more from the expert drawer box manufacturers at DCDrawers.com

Dowel Joints

 what-is-a-dowel-joint-custom-dowel-joint-drawers

Dowels joints are a way that drawers sections are fastened together. Including dowels in the connecting sections of wood make more accurate, stronger connections that simply using glue alone. Dowel joints are incredibly strong and visually attractive if they are done right. This type of joint is very popular for drawers or other woodworking in which a butt joint is being used. It helps increase the strength and durability of the joint.

What Are Dowel Joints Used For?

Dowel joints are used in a wide variety of woodworking projects. They offer a number of benefits during production and after.

Increased strength – Miter and butt joints are sometimes only glued together. This means that the stresses of whatever use the wood sees will wear on the joint. Humidity can also dry out or cause glue to lose its adhesive properties. Dowels are added to the joints by drilling into each joining piece of wood so the corresponding holes share a dowel.  Having the dowels physically connect the wood dramatically increases strength.

Keeping It Straight – When producing wood products without dowels it can be a challenge to glue and clamp down the pieces without them moving during the drying and setting time. The inclusion of dowels ensures that everything is perfectly lined up and when glued and clamped it is perfectly straight and dries stronger.

Pin Joints – Certain types of joints require the ability to twist. Dowels are generally round in shape, which allows a certain level of twisting. This is easier and more simple than other tail-and-pin joints.

Dowels Work Better Than Biscuits – Biscuit cuts are easier and faster to make but are not as strong or durable. The material is thin and has a possibility to absorb humidity and swell. This can mean a bulge in the joint material and the extra stress can cause it to loosen or fail entirely.

Advantages Of Dowel Joints

No Need For Metal Fasteners – Nails, staples, and screws are fine when found behind sheetrock. For custom drawers or other fine interior cabinetry features they are visually disturbing and upset the grain patterns we all love. Dowels do the job while not being seen.

Increased Durability And Strength – Because the wooden dowel runs inside the connecting wood sections it holds fast and is much stronger. Nails, screws or staples are thinner and many times are not properly installed. They can stretch and splinter the wood making it weaker. This adversely affects the lifespan of whatever wooden structure is being made.

What Are Dowels Made Of?

Dowels can be made from metal, plastic, or more commonly wood. In custom drawer and cabinetry the internal dowel joints are made of wood. For cabinet shelves metal dowels are very common. They are good choices for the moving of shelves. This is good for moving shelves but wooden dowels are used for custom drawer manufacturing as they have increased grain and friction inside the drilled holes and increased durability.

Custom Dowel Joint Drawer Production

Drawer Connection, Inc. has been making customer drawers since 1997 and can produce any drawers you need. Be it dovetail or dowel we can custom make the drawers you want for your kitchen, custom closet organization system, bathroom cabinetry or anywhere else you need to have drawers. Give us a call to get your project started at 1-877-917-4887. Stay tuned for more from the expert drawer box manufacturers at DCDrawers.com

Dovetail Drawers

If you’re searching for the advantages of dovetail joints when considering which type of drawer boxes to purchase, this post should help.  Dovetail Drawers are a common concept in the professional bath and kitchen cabinetry industry. But not one that all homeowners are familiar with.  What a dovetail joint is usually only comes up when deciding which type is best for their bathroom or kitchen.

Dovetail Drawers have long been the standard in premium cabinet making. Despite the appeal and popularity, not many people are sure of what they exactly are.  Let us explain further what a dovetail joint is and why they are the premium drawer box option.

What Are Dovetail Drawers?

The term “Dovetail Drawer” pertains to a particular design structure of the drawer, where the drawer compartment is made of solid wood and a dovetail joint secures the sides of the drawer with its front. This distinctive joint that resembles pieces from a jigsaw puzzle perpendicularly joined together at the drawers outside corners makes dovetail drawers easily recognizable.

There are several benefits to designing a drawer to have this structure, some of which we’ll outline further in the article.

Considered a premium drawer option among homeowners, dovetail drawers differ from regular drawers in how they’re constructed and the kind of joint they use is exclusive to dovetail drawers. Some drawer manufacturers even use Dovetail Joints on pull out shelves. This particular joint is called a locking joint, and comprises of wedge-shaped cuts at the end of the wooden frame that fit into each other from each side, forming a box. These cuts, or pins and tails as they’re called, form an incredibly strong and resistant box when they fit into each other. The joint is so strong, in fact, that even when the drawer breaks, it rarely breaks from the area of the joint.

Back to top

Large Surface Area

It’s not just the mechanics of the locking joint that make it so durable, but also the large surface area it provides to apply glue on, and this increased amount of glue between the joints enhances the drawer’s durability and strength.

Back to top

Dovetail Drawer Design

The design of the joint also allows for increased storage space, and even more so in English dovetails, which are the ones that attract most popularity and easily become a part of all kinds of furniture. French dovetail drawers lean towards the specialty and luxury furniture market with pieces that have curved fronts, and joints on the drawer sides shaped such that they slide upwards and fit in a trench shaped opening running through the front piece.

English Dovetail

The English Dovetail is one where you can see the ends of the adjoining pieces at the corners of the drawers.  This is the premium type of dovetail joint design as it is the tightest and longest lasting joint.  The English Dovetail makes the joint at the very edge of the wood, which means you get the most space inside the drawer.  In the finest drawers and furniture you will find the English Dovetail as it’s simply stronger and better looking.

French Dovetail

The French Dovetail differs greatly from the English Dovetail. Instead of having numerous “fingers” that joint to create an incredibly strong corner the French dovetail is 1 channel cut in board A and board B is shaped to fit in that channel.  This design is simply inferior as it hinges the durability of the drawer on thin edges of wood inside the channel.  French dovetail joints also must be made a distance in from the corner of the wood, which means the drawers are more narrow or not as deep.

Sliding Dovetail

Believe it or not all dovetail joints are sliding dovetail joints.  Dovetail joints are by nature and definition those where two pieces of wood are machined to have corresponding sections that slide together.  So all dovetail drawers are sliding dovetail joints.  With that said a lot of consumers call the French Dovetail a “sliding joint” as it does slide together further.

Back to top

Dovetail Drawer Joints

As mentioned earlier, the way the joints are constructed is what makes dovetail drawers unique, and this is also what brings its advantages. These locking joints enable the drawer to be stronger and sturdier, at the same time offering a larger storage space.Although often seen as a standard for good quality drawers, this isn’t always the case. With a variety of different drawer constructions, you should assess the drawers’ sturdiness and storage capacity when on the lookout for the right drawers for your cabinets.

Back to top

Dovetail Advantages Over Other Drawers

Dovetail drawers take the lead against ordinary drawers as the locking joints ensure that the drawer sides and front are securely held together, forming a durable bond that easily withstands minor wear and damage. Not all wooden drawers are made of solid wood, with your average drawer comprising of particleboard planks stapled together, but dovetail drawers are, which becomes an immediate advantage as people can be confident while making a purchase that the drawers are a hundred percent wood.This wood goes through a sanding, buffing and finishing process before it is cut with precision to fit in the locking joint. This results in an end product that is sturdy and durable but also stunning to look at, and a trademark of pure craftsmanship.

While dovetail drawers remain the standard for hundreds of years, the industrial revolution and modern advancements gave way to much faster and cheaper mass production of particleboard drawers with pieces stapled together by industrial machines. What came out of this was certainly an economical product, but one which lacked the durability, the refinement and the uniqueness of the dovetail drawer.

Back to top

Biggest Advantages Of Dovetail Drawers

There are 3 key advantages to quality dovetail joints when constructing drawers or furniture.  These advantages are primarily about the English Dovetail Joint, as it is the standard for the highest quality and most durable woodwork.

1. Sturdiness: 

As the sides of the drawer seamlessly fit into the front, this creates a strong bond that glued or stapled drawers can’t match. The use of solid wood rather than thin and less sturdy particle boards in making drawer boxes also enhances the durability and strength of the drawer.The perfect integration of solid wood and a locking joint in the drawer makes for a premium drawer that ordinary drawers can’t compare to.

2. Durability: 

As mentioned above, the solid wood and the locking joint enhance the drawer’s durability and make for a drawer that could easily last a lifetime. Whereas regular drawers have drawer glides on each side, open to wear and tear, dovetail drawers feature glides underneath the drawer box. Since they are the only part of the drawer that takes the brunt of the work and consequential wear, the best place for them is underneath the drawer, which is exactly where the dovetail drawer puts them.

3. Craftsmanship:

Due to the amount of detail, precision, and craftsmanship that goes into the production of a dovetail, they have a premium feel to them that is still considered a standard in luxury cabinet making. Those with a refined taste will appreciate the drawers’ seamless construction and how smoothly it slides in and out of the cabinet.To ensure a premium drawer that looks stunning and works without a flaw, dovetail drawers need to be crafted with utmost precision, focus and above all, patience; all of which makes way for a product superior than most its counterparts.

Back to top

Conclusion

Although there are many consideration and features that factor in on how long your cabinet fixtures are going to last, an important one is dovetail drawers. Their quality and durability is rarely matched, and they are sure to enhance the performance and the lifespan of your cabinetry.

More About DC Drawers (Drawer Connection)

At Drawer Connection, our philosophy is to “give customers the drawer quality they deserve at a price they can afford.” And we have been doing just that since 1997. We provide our customers with the highest quality materials, craftsmanship and customer service. Our dedication to exceeding your expectations ensures that you will receive a high-quality product, complete to your specifications, and on time.

At Drawer Connection, our philosophy is to “give customers the drawer quality they deserve at a price they can afford.” And we have been doing just that since 1997. We provide our customers with the highest quality materials, craftsmanship and customer service. Our dedication to exceeding your expectations ensures that you will receive a high-quality product, complete to your specifications, and on time. Give us a call today for more information about dovetail drawers 1 (877) 917-4887. Stay tuned for more from the expert drawer box manufacturers at DCDrawers.com

Buying Cheap Drawer Boxes

Whether you’re doing a full remodel in your kitchen, installing new kitchen cabinetry, or just need new drawer boxes everyone wants the best deal!  Keep reading if you want to learn how to buy cheap drawer boxes that give you the best value.  Just because the prices are cheap doesn’t mean the quality has to suffer.  Find out how to get the best drawer boxes at the best prices in this post.

Cutting Out The Middleman

Before the internet it was impractical for manufacturers to offer their products direct to the public.  There wasn’t a way to show all of the options to consumers and take orders without needing a giant workforce.  Today the advent of the internet has made it possible to have a 24/7 salesman always bright, cheery, and ready to show you every single option in your own time.  When you’re ready you simple choose the style of joint, species of wood, thickness, and sizes of drawer boxes you need.

This saves you a mountain of cash over buying from big box and retail stores.  Retail store must pay to store stock product, transportation, warehouse staff, sales staff, office staff, and management staff along with all of the overhead standard in operating a brick and mortar location.

Quality & Focus

When the only thing a company does is build drawer boxes it causes focus.  They aren’t switching gears from windows, doors, and lumber to the occasional drawer box, it is the only thing they do.  This means that the drawers are build consistently better and faster.  That means you get the quality you want and it takes the factory less time to make your order.  When your order takes less time to fabricate it spells savings for the consumer.

Custom Orders & Sizes

When you order online from the factor your order is being taken and then fabricated to your specs.  You don’t have to try to make whatever they have in the warehouse work for your purposes.  You get the custom sizes, styles, and wood you want for your kitchen or bathroom at the best prices.

Shipping Direct To You

Another huge benefit of buying your cabinet drawer boxes online is that you can have them shipped straight to the property or shop.  Homeowners are able to place an order and not have to worry about how to fit all of the drawer boxes into their vehicle.  In addition cabinetry companies can choose to have the drawer boxes shipped straight to the shop.

Flatpack Drawer Boxes

To save on shipping costs or storage space drawer boxes can be ordered in flatpack boxes.  These drawer kits are great options for cabinetry companies who need to keep stock of standard drawer boxes on hand for jobs.  This saves the cabinetry company time and keeps their most skilled employees in the field installing instead of at the shop making drawers.  This allows cabinetry companies to stay focused on scheduling more installations and staying busier.

The Best Replacement For Unfinished Kitchen Cabinet Doors – For The Lowest Cost 2022

The best cabinet doors are available online and are easy to find.

Simply ask yourself the following questions:

Which would I come more near finding superior quality from, a cabinet door factory or someone who makes cabinets doors on the side, as a hobby?

  1. Which would I expect better quality from, a factory that has invested, perhaps millions in to their machinery or someone that has put a lot less in to it?
  2. Which do I think pays the most for their lumber, someone who buys it by the truck loads or a small supplier?
  3. Which one do I think would demand more of a quality lumber, someone who gets it by the truck loads or an individual customer?
  4. Do I actually feel that a larger cabinet door manufacturer is going to utilize the economy and scale towards a lower cost going by volume when purchasing, with their increasing productivity being automated and computerized machinery?
  5. Would it be safe to say that with all the overhead cost, a larger cabinet door manufacturer will also offer lower prices?

If you have answered ‘Yes’ to the questions above, then you should know that there are several sources that can be found online, sources that can and will, be able to save you anywhere between thirty and fifty percent on all your replacement cabinet doors.

After determining that you do have a choice, and not just with retail hardware stores, but that you have a choice of purchasing between the retail store and the manufacturer themselves. Which means that you have the choice of buying your replacement cabinet doors online, straight from the manufacturer that supplied the retail store in the first place.

Do this: Visit your hardware stores and note the prices they are charging. Now, go online and compare those unfinished kitchen cabinet door prices to the one’s you find straight from the manufacturer, the one’s that supplied those retail stores. You do the math; I think the amount you could save will shock you.

Kitchen Cabinet Costs 2022

Kitchen cabinets costs about $650 with average prices of installation ranging from $100 to $1200 in the US for 2022, according to HomeAdvisor.com.

A kitchen cabinet helps define the appearance and usefulness of your kitchen. If you have an outdated or hard to use kitchen design, your kitchen might be falling short of its possibilities as the leisure and meal prep focus of your house. Installing new kitchen cabinets will enhance its looks and convenience – and boost the charm of your house.

Kitchen Cabinet Prices Per Linear Foot

The linear foot price of $100 to $1,200 will include everything from traditional to premium custom cabinet alternatives.

Traditional Kitchen Cabinets

A traditional cabinet is the most budget-friendly choices accessible to homeowners at $100 to $300 per linear foot installed, or $50 to $100 per linear foot for the materials themselves. Traditional or builder’s-quality construction has fewer design choices, but the cost is significantly lower than semi custom and custom alternatives.

  • Pro: Budget-friendly price.
  • Con: Insufficient design choices, and quality problems.

Semi Custom Kitchen Cabinets Cost

When you have a bigger budget or want custom sizing or beauty, semi-custom designs provide a wider assortment of choices from $150 to $650 per linear foot installed. The materials themselves are priced $75 to $400 per linear foot. Semi-traditional is ideal for homeowners wanting unique, longer lasting types without the larger cost of custom designs.

  • Pro: Reasonably priced, additional design and measurement choices.
  • Con: Insufficiency of unique designs and materials.

Custom Kitchen Cabinets

Custom kitchen cabinets are priced at $500 to $1,200 per linear foot installed. Materials themselves cost between $300 and $750 per linear foot. They are ideal for oddly shaped kitchens or certain design and convenience needs. While custom installations meet your precise specifications, you could expect a considerable cost increase.

  • Pro: Limitless design opportunities.
  • Con: Cost.

Kitchen Cabinet Finishes

Kitchen cabinets come in many different finishes. Read more about their costs below.

Wood Veneer Cabinet Costs

Wood veneer can cost somewhere between $2,000 to $15,000. They are wood strips applied to particleboard or plywood. They provide the same look and feel of wood devoid of the larger price tag.

Stainless Steel Kitchen Cabinets Costs

Stainless steel cabinets run from $25,000 to $38,000. Since the price tag and aesthetics, it’s a less often used material than wood, laminates or veneers. Nevertheless, a lot of homeowners are choosing stainless because of its resilience, appearance and exceedingly long lifespan.

Laminate Kitchen Cabinets Costs

Laminates are priced at $4,000 to $15,000. Comparable to wood veneers, it’s a budget-friendly option to wood. It is a man-made material that is placed on particleboard in both high pressure and low pressure method.

Acrylic Kitchen Cabinets Costs

Acrylics are priced at $5,000 to $20,000 or more depending on the base material used. Acrylic is a very durable, high-gloss finish applied comparable to varnish. It comes in different colors usually on flat panels for a state-of-the-art appearance. Cost differences are because of the primary material used that can be anything from wood to MDF to wood to metal.

Kitchen Cabinetry Estimates by Design

The price of framed and frameless differ based on the wood, assembly and size of the project. The most critical decision when considering design is it it will fit the existing home furnishings.

Framed Kitchen Cabinets Cost

Framed kitchen cabinets cost $5,000 to $20,000+. Framed construction means that the rails and stiles are visible at the front and creates a flat frame that the cabinet door is affixed to. They are perfect for homeowners wanting a more traditional kitchen cabinet design.

Frameless Kitchen Cabinets Cost

Frameless kitchen cabinets cost $6,000 to $30,000+. Custom designs can induce higher end prices as ranges are nearly always due to the material quality, degree of customization and how big your kitchen is. They’re used in trendy and current designs. Frameless construction depends on a heavier box to conceal the frame and hang the cabinet doors.

Inset Kitchen Cabinets Cost

Inset, or flush mount, cabinets have the same range as most other semi custom and custom cabinets, $150 to $1,200 per linear foot. Expect to pay about 20 percent more for flush mounts than a comparable traditional design with the same level of materials. This kind has a unique design where the doors and drawers, when they’re closed, are flush with face frame opening.

Cost of Shaker Kitchen Cabinets

Shaker kitchen cabinets are priced the same as the other styles or around $100 and $1,200 per linear foot. These are style choice for the door and drawer faces, not a material variance.

Cost of Kitchen Cabinets by Size

10’ x 10’ Kitchen Cabinets Cost

At one time the standard, the 10’ x 10’ kitchen cabinet runs $2,000 to $24,000 dependent on the kind and materials you decide on. This size is 20 linear feet although the average size has expanded nearer to 25 linear feet.

12’ x 12’ Kitchen Cabinets Cost

Cabinets for a standard 12’ by 12’ kitchen cabinet costs $2,500 to $29,000. This size is around the average kitchen size in most US homes. The size of kitchens has doubled since the 20’s to adjust to open concepts, increases in storage requirements and larger and more popular appliances.

Cupboards for Small Kitchens

Homeowners end up spending around $1,700 to $20,000 on just the cupboards for a smaller kitchen. A small kitchen is usually 70 square feet or less. Homeowners don’t have to give up style or productivity in an old house with a small kitchen.

Accidents happen and if you’ve got a broken drawer in your kitchen you’ll want to fix it so you don’t have items falling out of your drawers.  Parts of homes wear out and the drawers in our kitchens are no different. When they break it can be frustrating to lose the storage space and an eyesore having an open gap.

Some “quick-and-dirty” handymen will do things like nail or glue the drawer front back in place and just forget there ever was a drawer, perhaps to make a tee time or get back to watching TV. Learning how to replace kitchen drawers need not be a painful project, let us show you how here.

Kitchen Drawer Replacement Steps

Use this step by step guide to learn how to replace kitchen drawers and where to buy replacement drawer boxes:

1. Measure The Replacement

To get started you will need to know the size of the replacement you need. Get the height, width, and depth of the opening for the replacement drawer.  Take off an inch for your height and width measurements and at minimum of a half inch from the depth which will allow for easy fitting and drawer slides.

2. Build or Buy a Replacement Drawer Box

Drawer boxes are typically custom built for each kitchen so heading down to the local Walmart to pick up a replacement isn’t an option. To get a replacement that will work you will either need to build a replacement, have a friend do it, or order a drawer box from a professional.

Custom made cheap replacement cabinet drawers can be made in your choice of material, using either dovetail joints or dowel joints, in exactly the size you need.  A replacement drawer box measuring 18” wide by 20” deep by 4” high costs less than $30 dollars from Drawer Connection.

DIY Kitchen Drawer Replacement

Step 1. – Remove the broken drawer out of the cabinetry and put it on a table.  Take the drawer front off by removing the screws that hold it in place.

Step 2. – Flip the drawer over and remove the metal runners from the sides of the drawer.  If the bottom of the drawer falls out, just set it aside.

Step 3. – Tap on all the sides of the drawer to separate it into the 5 sections that make up a drawer, the 2 sides, front, back, and bottom.

Step 4. – Measure the sections of your drawer and use your table saw to rip new replacement sections.  You’ll need to match the lengths and widths of all the the sections.  The front, back, sides, and bottom need to be exact so the runners can be replaced and the drawer will fit correctly.

Step 5. – Using a 1/4 inch dado blade for your table saw prepare your table saw by setting the bland and fence to 1/4 inch.  Run the front, back, and sides through the saw to create a channel in each of the pieces.

Step 6. – Set all four of your sections together, as if they were already put together.  The side pieces should sit on the sides of the front and back sections.  The channel from step 5 should all sit at the bottom of the drawer at the same height.  Measure the inside of the width and length of the drawer and add 1/2 inch to each measurement.  Cut a section of 1/4 plywood to those measurements to be the bottom of your drawer.

Step 7. – Get some wood glue and run a bead where the drawer bottom will sit.  Set the bottom into the channel made for it ensuring there’s a nice coating of wood glue.  Use clamps to hold all of the sections together until the glue dries.  It’s a good idea to wipe off any excess glue at this stage.

Step 8. – Drill holes for the drawer front screws to go through that are 3/16ths thick.  Using screws that are 1 1/4″ attach the front back to the drawer box.  Reattach the metal runners on the drawer and screw them into lace using 3/4 screws.  Set your DIY drawer into place back in the cabinetry and you’re done.d

3. Buying Drawer Slides To Match

The next step is making sure you have drawer slides that match your drawer box depth. You can choose from inexpensive roller slides to ball bearing slides that have soft close and smooth opening features. Most homeowners prefer buying the bottom-mount style drawer slides as they have a piece which wraps around the lower edges of the drawer box and makes for easier installation. There are cases where old hardware from the slides is still intact and can be reused, but many homeowners prefer starting fresh when repairing their cabinet drawers.

4. Prepping The Work Area

Depending on why the drawer broke, and how quick and dirty the repairs where you might have very little work, or a lot of work to do here. If there is any broken wood or hardware it should be removed and replaced. This can mean any glue that was used as a band-aid to hold the drawer front on the face of the cabinets, or it can mean removing and replacing broken or splintered wood inside your cabinets to have a solid area to secure your new drawer.  For glues you can try heating the adhesive up with a blow dryer or you can simply use a scraper to work the glue off and then sand & repaint the area.

5. Installing The New Drawer Box

Once your drawer box arrives, you will want to wait to attach the drawer front until the drawer box is installed and sliding back and forth correctly.  It can be a bit tricky to align the drawer front right, using double-sided tape to tack the pieces together saves time and effort. When installing the drawer ensure that the gaps on the top, bottom, and sides are equal. Once you are sure the box is installed right you can use at least 2 screws to secure the drawer front to the drawer box, from the inside of the drawer.

Buy Replacement Kitchen Drawers @ Drawer Connection

Buy cheap replacement kitchen drawers at Drawer Connection.  You can also shop for replacement dovetail drawer boxes and dowel drawer boxes on Drawer Connection’s site.